I. PRIMARY FORMS - Harmonized System Codes, Taric Code, HS Code,

PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF

PLASTICS AND ARTICLES THEREOF

POLYMERS OF ETHYLENE, IN PRIMARY FORMS

Select the tariff heading that matches your search

3901000000	Polymers of ethylene, in primary forms
3901100000	- Polyethylene having a specific gravity of less than 0,94
3901101000	- - Linear polyethylene
3901101020	- - - High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -\|a melt flow rate (MFR 190\|°C/2,16\|kg) of 16g/10min or more, but not more than 24\|g/10\|min and -\|a density (ASTM D 1505) of 0,922\|g/cm$3\|or more, but not more than 0,926\|g/cm$3\|and -\|a vicat softening temperature of min. 94\|°C	BTI Select
3901101030	- - - Polietileno lineal de baja densidad (LLDPE) (CAS\|RN\|9002-88-4) en polvo, con -\|un contenido en peso de comonómerosno superior al 5\|% , -\|un índice de flujo de fusión igual o superior a 15g/10\|min, pero inferior o igual a 60g/10min, y -\|una densidad igual o superior a 0,922g/cm$3\|pero inferior o igual a 0,928\|g/cm$3	BTI Select
3901101040	- - - Linear low-density polyethylene\|(LLDPE) (CAS\|RN\|9002-88-4) in the form of powder, with -\|not more than 5\|%\|by weight of comonomer, -\|a melt flow rate of 15\|g/10\|min or more, but not more than 60\|g/10\|min and -\|a density of 0,922\|g/cm$3\|or more, but not more than 0,928\|g/cm$3	BTI Select
3901101090	- - - Other	BTI Select
3901109000	- - Other
3901109020	- - - Polyethylene, in the form of granules, of a specific gravity of 0,925\|(±\|0,0015), a melt flow index of 0,3\|g/10\|min (±\|0,05\|g/10\|min), for the manufacture of blown films of a haze value not more than 6\|% and an elongation at break (MD/TD) of 210/340	BTI Select
3901109030	- - - Polyethylene granules, containing by weight 10\|% or more but not more than 25\|% of copper	BTI Select
3901109090	- - - Other	BTI Select
3901200000	- Polyethylene having a specific gravity of 0,94\|or more
3901201000	- - Polyethylene in one of the forms mentioned in note\|6(b) to this chapter, of a specific gravity of 0,958\|or more at 23\|°C, containing: -\|50\|mg/kg or less of aluminium, -\|2\|mg/kg or less of calcium, -\|2\|mg/kg or less of chromium, -\|2\|mg/kg or less of iron, -\|2\|mg/kg or less of nickel, -\|2\|mg/kg or less of titanium and -\|8\|mg/kg or less of vanadium, for the manufacture of chlorosulphonated polyethylene	BTI Select
3901209000	- - Other	BTI Select
3901209010	- - - Polyethylene, in one of the forms mentioned in note 6\|(b) to Chapter 39, of a specific gravity of 0,945\|or more but not more than 0,985, for the manufacture of films for typewriter ribbon or similar ribbon	BTI Select
3901209020	- - - Polyethylene, containing by weight 35\|% or more but not more than 45\|% of mica	BTI Select
3901209090	- - - Other	BTI Select
3901300000	- Ethylene-vinyl acetate copolymers
3901300010	- - For cavity filling, for use in certain types of aircraft	BTI Select
	- - Los demás
3901300080	- - - Copolímero de etileno y acetato de vinilo -\|con un contenido en peso de acetato de vinilo igual o superior al 27,8\|% pero no superior al 29,3\|%, -\|con un índice de flujo de fusión ("melt flow index") igual o superior a 22\|g/10\|min pero no superior a 28\|g/10\|min, -\|con un contenido de monómero de acetato de vinilo no superior a 15\|mg/kg	BTI Select
3901300099	- - Other	BTI Select
3901400000	- Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0,94
3901400010	- - High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -\|a melt flow rate (MFR 190\|°C/2,16\|kg) of 16g/10min or more, but not more than 24\|g/10\|min and -\|a density (ASTM D 1505) of 0,922\|g/cm$3\|or more, but not more than 0,926\|g/cm$3\|and -\|a vicat softening temperature of min. 94\|°C	BTI Select
3901400020	- - Octene linear low-density polyethylene (LLDPE) in the form of pellets of a kind used in the co-extrusion processing of films for flexible food packaging with: -\|10\|% or more but not more than 20\|% by weight of octene, -\|a melt flow ratio of 9,0\|or more, but not more than 10,0\|(using ASTM D1238\|10.0/2.16), -\|a melt index (190°C/2.16\|kg) of 0,4\|g / 10\|min or more but not more than 0,6\|g / 10\|min, -\|a density of 0,909 g/cm³ or more, but not more than 0,913 g/cm³ using ASTM D4703, -\|a gel area per 24,6 cm³ of not more than 20 mm²; and -\|an anti-oxidant level of not more than 240\|ppm	BTI Select
3901400030	- - Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method\|in the form of pellets with: -\|more than 10\|% but not more than 20\|% by weight of copolymer, -\|a melt flow rate (MFR 190°C/2,16\|kg) of 0,7\|g / 10\|min or more\|but not more than 0,9\|g / 10\|min, and -\|a density (ASTM D4703) of 0,911 g/cm³ or more, but not more than 0,913 g/cm³ for use in the co-extrusion processing of films for flexible food packaging	BTI Select
3901400040	- - Block copolymer of ethylene with octene in the form of pellets: -\|with a specific gravity of 0,862\|or more, but not more than 0,865, -\|able to stretch to at least 200\|% its original length, -\|with a hysteresis of 50\|%\|(±10\|%), -\|with permanent deformation of not more than 20\|%, for use in the manufacture of napkin liners for babies	BTI Select
3901400090	- - Other	BTI Select
3901900000	- Other
3901903000	- - Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35\|% or less of styrene, in one of the forms mentioned in note\|6(b) to this chapter	BTI Select
3901908000	- - Other
3901908010	- - - For cavity filling, for use in certain types of aircraft	BTI Select
	- - - Other
3901908050	- - - - High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -\|a melt flow rate (MFR 190\|°C/2,16\|kg) of 16g/10min or more, but not more than 24\|g/10\|min and -\|a density (ASTM D 1505) of 0,922\|g/cm$3\|or more, but not more than 0,926\|g/cm$3\|and -\|a vicat softening temperature of min. 94\|°C	BTI Select
	- - - Other
3901908053	- - - - Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with -\|an acrylic acid content of 18,5\|% or more but not more than 49,5\|% by weight (ASTM D4094), and -\|a melt flow rate of 14g/10\|min (MFR 125\|°C/2.16\|kg, ASTM D1238) or more	BTI Select
3901908055	- - - - Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: -\|an acrylic acid content of 6\|% or more but not more than 50\|% by weight, and -\|a melt flow rate of 1g/10\|min or more at 190\|°C/2.16\|kg (measured using ASTM D1238)	BTI Select
3901908057	- - - - Octene linear low-density polyethylene (LLDPE) in the form of pellets used in the co-extrusion processing of films for flexible food packaging\|with: -\|10\|% or more but not more than 20\|% by weight of\|octene,\| -\|a melt flow ratio of 9,0\|or more, but not more than 10,0\|(using ASTM D1238\|10.0/2.16), -\|a melt index (190°C/2.16\|kg) of 0,4\|g / 10\|min or more but not more than 0,6\|g / 10\|min, -\|a density (ASTM D4703) of 0,909\|g/cm$3\|or more, but not more than 0,913\|g/cm$3, -\|a gel area per 24,6\|cm$3\|of not more than 20\|mm$2; and -\|an anti-oxidant level not exceeding 240\|ppm	BTI Select
3901908063	- - - - Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method\|in the form of pellets with: -\|more than 10\|% but not more than 20\|% by weight of copolymer, -\|a melt flow rate (MFR 190°C/2.16\|kg) of 0.7\|g / 10\|min or more\|but not more than 0.9\|g / 10\|min, and -\|a density (ASTM D4703) of 0,911\|g/cm$3\|or more, but not more than 0,913\|g/cm$3 for use in the co-extrusion processing of films for flexible food packaging	BTI Select
3901908065	- - - - Linear low-density polyethylene\|( LLDPE) (CAS RN 9002-88-4) in the form of powder, with -\|more than 5\|%, but not more than 8\|% by weight of comonomer, -\|a melt flow rate of 15\|g/10\|min or more, but not more than 60\|g/10\|min and -\|a density of 0,922\|g/cm$3\|or more, but not more than 0,928\|g/cm$3	BTI Select
3901908067	- - - - Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11\|% by weight\|or more	BTI Select
3901908070	- - - - Ethylene maleic anhydride copolymer, whether or not containing another olefin comonomer, with a melt flow rate of 1,3g/10\|min or more at 190\|°C/2,16\|kg (measured using ASTM D1238)	BTI Select
3901908073	- - - - Mixture containing by weight -\|80\|% or more, but not more than 94\|% of chlorinated polyethylene (CAS RN 64754-90-1) and -\|6\|% or more, but not more than 20\|% of styrene-acrylic copolymer (CAS RN 27136-15-8)	BTI Select
3901908080	- - - - Block copolymer of ethylene with octene in the form of pellets: -\|with a specific gravity of 0,862\|or more, but not more than 0,865, -\|able to stretch to at least 200\|% its original length, -\|with a hysteresis of 50\|%\|(±10\|%), -\|with permanent deformation of not more than 20\|%, for use in the manufacture of napkin liners for babies	BTI Select
3901908091	- - - - Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid	BTI Select
3901908092	- - - - Chlorosulphonated polyethylene	BTI Select
3901908093	- - - - Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets	BTI Select
3901908094	- - - - Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35\|% of styrene	BTI Select
3901908097	- - - - Chlorinated polyethylene, in the form of powder	BTI Select
3901908099	- - - - Other	BTI Select
3901909000	- - Other
3901909010	- - - For cavity filling, for use in certain types of aircraft	BTI Select
	- - - Other
3901909050	- - - - High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -\|a melt flow rate (MFR 190\|°C/2,16\|kg) of 16g/10min or more, but not more than 24\|g/10\|min and -\|a density (ASTM D 1505) of 0,922\|g/cm$3\|or more, but not more than 0,926\|g/cm$3\|and -\|a vicat softening temperature of min. 94\|°C	BTI Select
3901909053	- - - - Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with -\|an acrylic acid content of 18,5\|% or more but not more than 49,5\|% by weight (ASTM D4094), and -\|a melt flow rate of 14g/10\|min (MFR 125\|°C/2.16\|kg, ASTM D1238) or more	BTI Select
3901909055	- - - - Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: -\|an acrylic acid content of 6\|% or more but not more than 50\|% by weight, and -\|a melt flow rate of 1g/10\|min or more at 190\|°C/2.16\|kg (measured using ASTM D1238)	BTI Select
3901909057	- - - - Octene linear low-density polyethylene (LLDPE) in the form of pellets used in the co-extrusion processing of films for flexible food packaging\|with: -\|10\|% or more but not more than 20\|% by weight of\|octene,\| -\|a melt flow ratio of 9,0\|or more, but not more than 10,0\|(using ASTM D1238\|10.0/2.16), -\|a melt index (190°C/2.16\|kg) of 0,4\|g / 10\|min or more but not more than 0,6\|g / 10\|min, -\|a density (ASTM D4703) of 0,909\|g/cm$3\|or more, but not more than 0,913\|g/cm$3, -\|a gel area per 24,6\|cm$3\|of not more than 20\|mm$2; and -\|an anti-oxidant level not exceeding 240\|ppm	BTI Select
3901909060	- - - - Polietileno de baja densidad\|(LLDPE) (CAS\|RN\|9002-88-4) en polvo, con -\|un contenido en peso de comonómeros superior al 5\|%, pero inferior o igual al8\|% , -\|un índice de flujo de fusión igual o superior a 15\|g/10\|min pero inferior o igual a 60\|g/10\|min, y -\|una densidad igual o superior a 0,922\|g/cm$3\|, pero inferior o igual a 0,928\|g/cm$3	BTI Select
3901909063	- - - - Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method\|in the form of pellets with: -\|more than 10\|% but not more than 20\|% by weight of copolymer, -\|a melt flow rate (MFR 190°C/2.16\|kg) of 0.7\|g / 10\|min or more\|but not more than 0.9\|g / 10\|min, and -\|a density (ASTM D4703) of 0,911\|g/cm$3\|or more, but not more than 0,913\|g/cm$3 for use in the co-extrusion processing of films for flexible food packaging	BTI Select
3901909065	- - - - Linear low-density polyethylene\|( LLDPE) (CAS RN 9002-88-4) in the form of powder, with -\|more than 5\|%, but not more than 8\|% by weight of comonomer, -\|a melt flow rate of 15\|g/10\|min or more, but not more than 60\|g/10\|min and -\|a density of 0,922\|g/cm$3\|or more, but not more than 0,928\|g/cm$3	BTI Select
3901909067	- - - - Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11\|% by weight\|or more	BTI Select
3901909070	- - - - Ethylene maleic anhydride copolymer, whether or not containing another olefin comonomer, with a melt flow rate of 1,3g/10\|min or more at 190\|°C/2,16\|kg (measured using ASTM D1238)	BTI Select
3901909080	- - - - Block copolymer of ethylene with octene in the form of pellets: -\|with a specific gravity of 0,862\|or more, but not more than 0,865, -\|able to stretch to at least 200\|% its original length, -\|with a hysteresis of 50\|%\|(±10\|%), -\|with permanent deformation of not more than 20\|%, for use in the manufacture of napkin liners for babies	BTI Select
3901909082	- - - - Copolímero de etileno y ácido metacrílico	BTI Select
3901909091	- - - - Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid	BTI Select
3901909092	- - - - Chlorosulphonated polyethylene	BTI Select
3901909093	- - - - Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets	BTI Select
3901909094	- - - - Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35\|% of styrene	BTI Select
3901909097	- - - - Chlorinated polyethylene, in the form of powder	BTI Select
3901909099	- - - - Other	BTI Select

I. PRIMARY FORMS Harmonized System Codes, Taric Code, HS Code, HTS Code, Harmonized Commodity Description, Commodity Codes, Classification of goods, Tariff Nomenclature, Customs Tariff Number, Tariff Classification.