Electric motors and generators (excluding generating sets)

New search Section notes Chapter notes

MACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES

ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES

ELECTRIC MOTORS AND GENERATORS (EXCLUDING GENERATING SETS)

Select the tariff heading that matches your search

8501100000	- Motors of an output not exceeding 37,5\|W
8501101000	- - Synchronous motors of an output not exceeding 18\|W
8501101010	- - - For use in certain types of aircraft	BTI Select
8501101020	- - - Synchronous motor for a dishwasher with a water flow control mechanism with -\|a length without axle of 24\|mm (+/- 0,3), -\|a diameter of 49,3\|mm (+/- 0,3) -\|a rated voltage of 220\|V AC or more but not more than 240\|V AC, -\|a rated frequency of 50\|Hz or more but not more than 60\|Hz, -\|an input power of not more than 4\|W, -\|a rotation speed of 4rpm or more but not more than 4,8rpm, -\|an output torque of not less than 10kgf/cm	BTI Select
8501101090	- - - Other	BTI Select
	- - Other
8501109100	- - - Universal AC/DC motors
8501109110	- - - - For use in certain types of aircraft	BTI Select
8501109190	- - - - Other	BTI Select
8501109300	- - - AC motors
8501109310	- - - - For use in certain types of aircraft	BTI Select
8501109390	- - - - Other	BTI Select
8501109900	- - - DC motors
8501109910	- - - - For use in certain types of aircraft	BTI Select
	- - - - Other
8501109954	- - - - - DC motor, brushless, with an external diameter of not more than 25,4\|mm, a rated speed of 2\|260\|(±15\|%) rpm or 5\|420\|(±15\|%) rpm, a supply voltage of 1,5\|V or 3\|V	BTI Select
8501109955	- - - - - Electric turbocharger \|actuator, with: -\|a DC motor with an output of 10W or more but not more than \|15W, -\|an integrated gear mechanism, -\|a (pulling)force of \|250N or more at 160°C elevated ambient temperature, -\|a (pulling) force of 250N or more in each position of its stroke, -\|an effective stroke of 15mm or more but not more than 20\|mm, -\|with or without an on-board diagnostics interface	BTI Select
8501109956	- - - - - DC Motor : -\|with a speed rotation of not more than 7000\|rpm (without load), -\|with a nominal voltage of 12\|V (± 4\|V), -\|with a maximum power of 13,78\|W (\|at 3,09\|A), -\|with a specified temperature range from -40°C to 160°C, -\|with a gear connection, -\|with a mechanical attachment interface, -\|with 2\|electrical connections, -\|with a maximum torque of 100\|Nm	BTI Select
8501109957	- - - - - DC motor: -\|with a rotor speed of not more than 6\|500\|rpm when not loaded; -\|with a rated voltage of 12,0\|V (+/- 0,1); -\|of a specified temperature range of \|- 40\|°C or more, but not more than + 165\|°C; -\|with or without a connecting pinion; -\|with or without an engine connector	BTI Select
8501109958	- - - - - DC Motor : -\|with a speed rotation of not more than\|6500\|rpm (without load), -\|with a nominal\| voltage of 12\|V (± 4\|V), -\|with a maximal power below than 20\|W, -\|with a specified temperature range from -40°C to 160°C, -\|with a worm gear drive, -\|with a mechanical attachment interface, -\|with 2\|electrical connections, -\|with a maximum torque of 75\|Nm	BTI Select
8501109960	- - - - - DC motor -\|with a rotor speed of 3\|500\|rpm or more but not more than 5\|000\|rpm loaded and not more than 6\|500\|rpm when not loaded -\|with a power supply voltage of 100\|V or more but not more than 240\|V for use in the manufacture of electric fryers	BTI Select
8501109965	- - - - - Electric turbocharger actuator, with: -\|a DC motor, -\|an integrated gear mechanism, -\|a (pulling)force of 200\|N or more at a minimum of 140°C elevated ambient temperature, -\|a (pulling) force of 250\|N or more in each position of its stroke, -\|an effective stroke of 15\|mm or more but not more than 25\|mm, -\|with or without an on-board diagnostics interface	BTI Select
8501109970	- - - - - DC stepping motor, with -\|an angle of step of 7,5\|° (± 0,5\|°) -\|a two-phase winding,\| -\|a rated voltage of 9\|V or more, but not more than 16,0\|V -\|of a specified temperature range covering at least\|- 40\|°C to +\|105\|°C -\|with or without connecting pinion -\|with or without motor drive connector	BTI Select
8501109975	- - - - - Permanently excited DC motor with -\|a multiple-phase winding -\|an external diameter of 28\|mm or more but not more than 35\|mm, -\|a rated speed of not more than 12\|000\|rpm, -\|a power supply voltage of 8\|V or more but not more than 27\|V	BTI Select
8501109979	- - - - - DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least - 20°C to + 70°C	BTI Select
8501109980	- - - - - DC stepping motor,\|with: -\|an angle of step of 7,5° (± 0,5°), -\|a pull-out torque at 25\|°C of 25\|mNm or more, -\|a pull-out pulse rate of 1\|500\|pps or more, -\|a two-phase winding, and -\|a rated voltage of 10,5\|V or more, but not more than 16,0\|V	BTI Select
8501109981	- - - - - DC stepping motor, with an angle of step of 18\|° or more, a holding torque of 0,5\|mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22\|mm\|!x!\|68\|mm, a two phase winding and an output of not more than 5\|W	BTI Select
8501109982	- - - - - DC motor, brushless, with an external diameter of not more than 29\|mm, a rated speed of 1\|500\|(±15\|%) rpm or 6\|800\|(±15\|%) rpm, a supply voltage of 2\|V or 8\|V	BTI Select
8501109990	- - - - - Other	BTI Select
8501200000	- Universal AC/DC motors of an output exceeding 37,5\|W
8501200010	- - Of an output exceeding\|735\|W but not exceeding\|150\|kW, for use in civil aircraft	BTI Select
8501200020	- - Of an output of less than 750\|W or exceeding 150\|kW, for use in certain types of aircraft	BTI Select
8501200030	- - Universal AC/DC motor with -\|a rated output of 1,2\|kW, -\|a supply voltage of 230\|V, and -\|engine brake, -\|assembled to a reduction gear with output shaft, which is contained in a plastic housing for use as electric drive of lawnmower blades	BTI Select
8501200090	- - Other	BTI Select
	- Other DC motors; DC generators
8501310000	- - Of an output not exceeding 750\|W
8501310010	- - - Motors of an output exceeding\|735\|W, DC generators, for use in civil aircraft	BTI Select
8501310020	- - - for use in certain types of aircraft	BTI Select
8501310025	- - - DC motors, brushless, with: -\|an external diameter of 80\|mm or more, but not more than 100\|mm, -\|a supply voltage of 12\|V, -\|an output at 20\|°C of 300\|W or more, but not more than 750\|W, -\|a torque 20\|°C of 2,00\|Nm or more, but not more than 7,00\|Nm, -\|a rated speed at 20\|°C of 600\|rpm or more, but not more than 3\|100\|rpm, -\|with or without the rotor angle position sensor of resolver type or Hall effect type, of the kind used in power steering systems for cars	BTI Select
	- - - Other
8501310030	- - - - DC motor, brushless, with a three-phase winding, an external diameter of 85\|mm or more, but not exceeding 115\|mm, a nominal torque of 2.23\|Nm (±\|1.0\|Nm), of an output of more than 120\|W but not exceeding 520\|W, calculated with 1550\|RPM (±\|350\|RPM) at a supply voltage of 12\|V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor)	BTI Select
8501310033	- - - Brushless DC motor assembly comprised of a motor and transmission, with: -\|an electronic control operating by\| Hall Effect position sensors, -\|a voltage input 9\|V or more but not more than 16\|V, -\|an external diameter of\|70\|mm or more but not more than 80\|mm, -\|an output motor power 450\|W or more but not more than 500\|W, -\|a maximum output\|torque 50\|Nm or more but not more than 52\|Nm, -\|a maximum output rotation speed 280\|rpm or more but not more than 300\|rpm, -\|a coaxial male spline outputs with an outer diameter of 20\|mm (±1\|mm), 17\|teeth and a minimum length of the teeth of\|25\|mm\|(± 1\|mm), and -\|a distance between root of splines of 119\|mm (± 1\|mm) for use in the manufacture of all-terrain\|or utility task vehicles	BTI Select
8501310035	- - - Automotive-ready, brushless and permanently excited direct current motor with: -\|a specified speed of not more than 4\|000\|rpm, -\|a minimum output of 400\|W, but not more than 1,3\|kW (at 12V), -\|a flange diameter of 90\|mm or more, but not more than 150\|mm, -\|a maximum length of 190\|mm, measured from the beginning of the shaft to the outer ending, -\|a housing length of not more than 150\|mm, measured from the flange to the outer ending, -\|a two-piece (basic housing including electric components and flange with minimum 2\|and maximum 6\|bore holes) aluminium diecast housing with a sealing compound (groove with an O-ring and grease), -\|a stator with single T-tooth design and single coil windings in 12/8\|topology and -\|surface magnets	BTI Select
8501310037	- - - - Permanently excited DC motor with -\|a multiple-phase winding, -\|an external diameter of 30\|mm or more but not more than 80\|mm, -\|a rated speed of not more than 15\|000\|rpm, -\|an output of 45\|W or more but not more than 300\|W and -\|a supply voltage of 9\|V or more but not more than 50\|V -\|whether or not with a drive disc -\|whether or not with a crankcase -\|whether or not with a fan -\|whether or not with a cap assembly -\|whether or not with a sun gear -\|whether or not with a speed and rotational direction encoder -\|whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type	BTI Select
8501310040	- - - Permanently excited DC motor with -\|a multiple-phase winding, -\|an external diameter of 30\|mm or more but not more than\|80\|mm, -\|a rated speed of not more than 15\|000\|rpm, -\|an output of 45\|W or more but not more than 300\|W and -\|a supply voltage of 9\|V or more but not more than 25\|V	BTI Select
8501310045	- - - - DC motors, brushless, with: -\|an external diameter of 90\|mm or more, but not more than 110\|mm, -\|a rated speed of not more than 3\|680\|rpm, -\|an output of 600\|W or more but not more than 740\|W at 2\|300\|rpm and at 80\|°C, -\|a supply voltage of 12\|V, -\|a torque of not more than 5,67\|Nm, -\|a rotor position sensor, -\|an electronic star-point relay, and -\|for use with an electric power steering control module	BTI Select
8501310050	- - - - DC motors, brushless, with:\| -\|an external diameter of 80\|mm or more, but not more than 200\|mm, -\|a supply voltage of 9\|V or more, but not more than 16\|V, -\|an output at 20\|°C of 300\|W or more, but not more than 750\|W, -\|a torque at 20\|°C of 2,00\|Nm or more, but not more than 7,00\|Nm, -\|a rated speed at 20\|°C of 600\|rpm or more, but not more than 3\|100\|rpm, -\|with or without the rotor angle position sensor of resolver type or Hall effect type, of the kind used in power steering systems for cars	BTI Select
8501310055	- - - - DC motor with commutator, with -\|an external diameter of 27.5\|mm or more, but not more than 45\|mm, -\|a rated speed of 11\|000\|rpm or more, but not more than 23\|200\|rpm, -\|a rated supply voltage of 3.6\|V or more, but not more than 230\|V, -\|an output power of not more than 529\|W, -\|a free load current of not more than 3.1\|A, -\|a maximum efficiency of 54\|% or more, for driving hand-held power tools	BTI Select
8501310060	- - - Brushless DC motor that can revolve counter clockwise (CCW), with: -\|an input voltage of 264\|V or more, but not more than 391\|V, -\|an external diameter of 81\|mm (± 2,5\|mm) or more, but not more than 150\|mm (± 0,8\|mm), -\|an output power of not more than 125\|W, -\|E or B class winding insulation,for use in the manufacture of indoor or outdoor units of split-type air conditioning machines	BTI Select
8501310071	- - - Automotive-ready, brushless and permanently excited direct current motor with: -\|a specified speed of not more than 4\|100\|rpm, -\|a minimum output of 400\|W, but not more than 1,3\|kW (at 12V), -\|a flange diameter of 90\|mm or more, but not more than 150\|mm, -\|a maximum length of 210\|mm, measured from the beginning of the shaft to the outer ending, -\|a housing length of not more than 160\|mm, measured from the flange to the outer ending, -\|a maximum of two-piece (basic housing including electric components and flange with minimum 2\|and maximum 11\|bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -\|a stator with single T-tooth design and single coil windings in 9/6\|or 12/8\|topology and -\|surface magnets	BTI Select
8501310073	- - - Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics	BTI Select
8501310075	- - - - Brushless DC motor assembly comprised of a motor and transmission, with: -\|electronic control operating by Hall Effect position sensors, -\|voltage input 9V or more but not more than 16V, -\|external diameter of the motor 70\|mm or more but not more than 80\|mm, -\|output motor power\| 350\|W or more but not more than 550W, -\|maximum output torque 50\|Nm or more but not more than 52\|Nm, -\|maximum output rotation speed 280\|rpm or more but not more than 300\|rpm, -\|coaxial male spline outputs of outer diameter\| 20\|mm (±1\|mm), 17\|teeth and minimum length of teeth 25\|mm (± 1\|mm), and -\|with distance between root of splines 119\|mm (± 1\|mm) for use in the manufacture of all-terrain or utility task vehicles	BTI Select
	- - - Other
	- - - - Crystalline silicon photovoltaic modules or panels
8501310081	- - - - - Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)	BTI Select
8501310082	- - - - - Consigned from Malaysia	BTI Select
8501310083	- - - - - Consigned from Taiwan	BTI Select
8501310089	- - - - - Other	BTI Select
8501310099	- - - - Other	BTI Select
8501320000	- - Of an output exceeding 750\|W but not exceeding 75\|kW
8501320010	- - - For use in civil aircraft	BTI Select
8501320030	- - - Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics	BTI Select
	- - - Other
	- - - - Crystalline silicon photovoltaic modules or panels
8501320041	- - - - - Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)	BTI Select
8501320042	- - - - - Consigned from Malaysia	BTI Select
8501320043	- - - - - Consigned from Taiwan	BTI Select
8501320049	- - - - - Other	BTI Select
	- - - Other
8501320050	- - - - Fuel cell module containing at least polymer electrolyte membrane fuel cells whether or not in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems	BTI Select
8501320060	- - - - Traction motor, with: -\|a torque output of 200\|Nm or more but not more than 300\|Nm -\|a power output of 50\|kW or more but not more than 100\|kW -\|a speed of not more than 12\|500\|rpm for use in the manufacture of electric vehicles	BTI Select
8501320070	- - - - Automotive-ready, brushless and permanently excited direct current motor with: -\|a specified speed of not more than 4\|000\|rpm, -\|a minimum output of 400\|W, but not more than 1,3\|kW (at 12V), -\|a flange diameter of 90\|mm or more, but not more than 150\|mm, -\|a maximum length of 190\|mm, measured from the beginning of the shaft to the outer ending, -\|a housing length of not more than 150\|mm, measured from the flange to the outer ending, -\|a two-piece (basic housing including electric components and flange with minimum 2\|and maximum 6\|bore holes) aluminium diecast housing with a sealing compound (groove with an O-ring and grease), -\|a stator with single T-tooth design and single coil windings in 12/8\|topology and -\|surface magnets	BTI Select
8501320077	- - - - Automotive-ready, brushless and permanently excited direct current motor with: -\|a specified speed of not more than 4\|100\|rpm, -\|a minimum output of 400\|W, but not more than 1,3\|kW (at 12V), -\|a flange diameter of 90\|mm or more, but not more than 150\|mm, -\|a maximum length of 210\|mm, measured from the beginning of the shaft to the outer ending, -\|a housing length of not more than 160\|mm, measured from the flange to the outer ending, -\|a maximum of two-piece (basic housing including electric components and flange with minimum 2\|and maximum 11\|bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -\|a stator with single T-tooth design and single coil windings in 9/6\|or 12/8\|topology and -\|surface magnets	BTI Select
8501320099	- - - - Other	BTI Select
8501330000	- - Of an output exceeding 75\|kW but not exceeding 375\|kW
8501330010	- - - Motors of an output not exceeding\|150\|kW and generators, for use in civil aircraft	BTI Select
8501330015	- - - Traction motor, with: -\|a torque output of 200\|Nm or more but not more than 300\|Nm -\|a power output of 50\|kW or more but not more than 100\|kW -\|a speed of not more than 12\|500\|rpm for use in the manufacture of electric vehicles	BTI Select
8501330020	- - - Of an output exceding 150 kW, for use in certain types of aircraft	BTI Select
8501330030	- - - Electric drive for motor vehicles, with an output of not more than 315 kW, with: • an AC or DC motor whether or not with transmission, • power electronics	BTI Select
8501330050	- - - Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics	BTI Select
8501330055	- - - Fuel cell module containing at least polymer electrolyte membrane fuel cells whether or not in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems	BTI Select
	- - - Other
	- - - - Crystalline silicon photovoltaic modules or panels
8501330061	- - - - - Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)	BTI Select
8501330062	- - - - - Consigned from Malaysia	BTI Select
8501330063	- - - - - Consigned from Taiwan	BTI Select
8501330069	- - - - - Other	BTI Select
8501330099	- - - Other	BTI Select
8501340000	- - Of an output exceeding 375\|kW
8501340010	- - - Generators for use in civil aircraft	BTI Select
8501340030	- - - Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics	BTI Select
	- - - Other
	- - - - Crystalline silicon photovoltaic modules or panels
8501340041	- - - - - Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)	BTI Select
8501340042	- - - - - Consigned from Malaysia	BTI Select
8501340043	- - - - - Consigned from Taiwan	BTI Select
8501340049	- - - - - Other	BTI Select
8501340099	- - - Other	BTI Select
8501400000	- Other AC motors, single-phase
8501402000	- - Of an output not exceeding 750\|W
8501402010	- - - Of an output exceeding\|735\|W, for use in civil aircraft	BTI Select
8501402020	- - - For use in certain types of aircraft	BTI Select
8501402030	- - - Assembly, consisting of - a single-phase electric AC commutator motor, with an output of 480 W or more, an input power of more than 900 W but not more than 1 600 W, an external diameter of more than 119,8 mm but not more than 135,2 mm and a rated speed of more than 30 000 rpm but not more than 50 000 rpm, and - an air-inducting ventilator, for use in the manufacture of vacuum cleaners	BTI Select
8501402040	- - - Electric AC commutator motor, single-phase, with an output of 250 W or more, an input power of 700 W or more but not more than 2 700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30 000 rpm but not more than 50 000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners	BTI Select
8501402080	- - - Other	BTI Select
8501408000	- - Of an output exceeding 750\|W
8501408010	- - - Of an output not exceeding\|150\|kW, for use in civil aircraft	BTI Select
8501408020	- - - Of an output exceeding\|150\|kW, for use in certain types of aircraft	BTI Select
8501408030	- - - Electric AC commutator motor, single-phase, with an output of more than 750 W, an input power of 700 W or more but not more than 2 700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30 000 rpm but not more than 50 000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners	BTI Select
8501408040	- - - Assembly, consisting of - a single-phase electric AC commutator motor, with an output of more than 750 W, but not more than 1 400 W, an input power of more than 900 W but not more than 1 600 W, an external diameter of more than 119,8 mm but not more than 135,2 mm and a rated speed of more than 30 000 rpm but not more than 50 000 rpm, and - an air-inducting ventilator, for use in the manufacture of vacuum cleaners	BTI Select
8501408050	- - - Electric drive for motor vehicles, with an output of not more than 315 kW, with: • an AC or DC motor whether or not with transmission, • power electronics	BTI Select
8501408090	- - - Other	BTI Select
	- Other AC motors, multi-phase
8501510000	- - Of an output not exceeding 750\|W
8501510010	- - - Of an output exceeding\|735\|W, for use in civil aircraft	BTI Select
8501510020	- - - Of an output of less than 750\|W, for use in certain types of aircraft	BTI Select
8501510030	- - - AC synchronous servo motor with resolver and brake for a maximum speed of\|not more than 6\|000\|rpm, with: -\|an output of 340\|W or more but not more than 7,4\|kW, -\|a flange of dimensions of not more than\|180\|mm\|!x!\|180\|mm, and -\|a length from flange to extreme end of resolver of not more than\|271\|mm	BTI Select
8501510090	- - - Other	BTI Select
8501520000	- - Of an output exceeding 750\|W but not exceeding 75\|kW
8501522000	- - - Of an output exceeding 750\|W but not exceeding 7,5\|kW
8501522010	- - - - For use in civil aircraft	BTI Select
	- - - - Other
8501522050	- - - - - AC synchronous servo motor with resolver and brake for a maximum speed of\|not more than 6\|000\|rpm, with: -\|an output of 340\|W or more but not more than 7,4\|kW, -\|a flange of dimensions of not more than\|180\|mm\|!x!\|180\|mm, and -\|a length from flange to extreme end of resolver of not more than\|271\|mm	BTI Select
8501522089	- - - - - Other	BTI Select
8501523000	- - - Of an output exceeding 7,5\|kW but not exceeding 37\|kW
8501523010	- - - - For use in civil aircraft	BTI Select
8501523090	- - - - Other	BTI Select
8501529000	- - - Of an output exceeding 37\|kW but not exceeding 75\|kW
8501529010	- - - - For use in civil aircraft	BTI Select
8501529090	- - - - Other	BTI Select
8501530000	- - Of an output exceeding 75\|kW
8501535000	- - - Traction motors
8501535010	- - - - Electric drive for motor vehicles, with an output of not more than 315 kW, with: • an AC or DC motor whether or not with transmission, • power electronics	BTI Select
8501535090	- - - - Other	BTI Select
	- - - Other, of an output
8501538100	- - - - Exceeding 75\|kW but not exceeding 375\|kW
8501538110	- - - - - Of an output not exceeding\|150\|kW, for use in civil aircraft	BTI Select
8501538120	- - - - - Of an output exceeding\|150\|kW, for use in certain types of aircraft	BTI Select
8501538190	- - - - - Other	BTI Select
8501539400	- - - - Exceeding 375\|kW but not exceeding 750\|kW
8501539410	- - - - - For use in certain types of aircraft	BTI Select
8501539490	- - - - - Other	BTI Select
8501539900	- - - - Exceeding 750\|kW
8501539910	- - - - - For use in certain types of aircrafts	BTI Select
8501539990	- - - - - Other	BTI Select
	- AC generators (alternators)
8501610000	- - Of an output not exceeding 75\|kVA
8501612000	- - - Of an output not exceeding 7,5\|kVA
8501612010	- - - - For use in civil aircraft	BTI Select
8501612030	- - - - Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics	BTI Select
	- - - - Other
8501612035	- - - - - Fuel cell module , AC generator with an output of 7.5\|kVA or less, consisting of: -\|a Hydrogen generator (desulphurizer, reformer and cleaner ) -\|a PEM fuel cell stack and -\|an Inverter for use as a part in a heating appliance	BTI Select
	- - - - Other
	- - - - - Crystalline silicon photovoltaic modules or panels
8501612041	- - - - - - Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)	BTI Select
8501612042	- - - - - - Consigned from Malaysia	BTI Select
8501612043	- - - - - - Consigned from Taiwan	BTI Select
8501612049	- - - - - - Other	BTI Select
8501612099	- - - - - Other	BTI Select
8501618000	- - - Of an output exceeding 7,5\|kVA but not exceeding 75\|kVA
8501618010	- - - - For use in civil aircraft	BTI Select
8501618030	- - - - Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics	BTI Select
	- - - - Other
	- - - - - Crystalline silicon photovoltaic modules or panels
8501618041	- - - - - - Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)	BTI Select
8501618042	- - - - - - Consigned from Malaysia	BTI Select
8501618043	- - - - - - Consigned from Taiwan	BTI Select
8501618049	- - - - - - Other	BTI Select
8501618099	- - - - Other	BTI Select
8501620000	- - Of an output exceeding 75\|kVA but not exceeding 375\|kVA
8501620010	- - - For use in civil aircraft	BTI Select
	- - - Other
8501620030	- - - - Fuel cell system -\|consisting of at least phosphoric acid fuel cells, -\|in a housing with integrated water management and gas treatment, -\|for permanent, stationary energy supply	BTI Select
8501620050	- - - - Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics	BTI Select
	- - - - Other
	- - - - - Crystalline silicon photovoltaic modules or panels
8501620061	- - - - - - Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)	BTI Select
8501620062	- - - - - - Consigned from Malaysia	BTI Select
8501620063	- - - - - - Consigned from Taiwan	BTI Select
8501620069	- - - - - - Other	BTI Select
8501620098	- - - - Other	BTI Select
8501630000	- - Of an output exceeding 375\|kVA but not exceeding 750\|kVA
8501630010	- - - For use in civil aircraft	BTI Select
8501630030	- - - Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics	BTI Select
	- - - Other
	- - - - Crystalline silicon photovoltaic modules or panels
8501630041	- - - - - Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)	BTI Select
8501630042	- - - - - Consigned from Malaysia	BTI Select
8501630043	- - - - - Consigned from Taiwan	BTI Select
8501630049	- - - - - Other	BTI Select
8501630099	- - - Other	BTI Select
8501640000	- - Of an output exceeding 750\|kVA	BTI Select
8501640030	- - - Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics	BTI Select
	- - - Other
	- - - - Crystalline silicon photovoltaic modules or panels
8501640041	- - - - - Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)	BTI Select
8501640042	- - - - - Consigned from Malaysia	BTI Select
8501640043	- - - - - Consigned from Taiwan	BTI Select
8501640049	- - - - - Other	BTI Select
8501640090	- - - - Other	BTI Select

Electric motors and generators (excluding generating sets) Harmonized System Codes, Taric Code, HS Code, HTS Code, Harmonized Commodity Description, Commodity Codes, Classification of goods, Tariff Nomenclature, Customs Tariff Number, Tariff Classification.