Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials Harmonized System Codes, Taric Code, HS Code, HTS Code, Harmonized Commodity Description, Commodity Codes, Classification of goods, Tariff Nomenclature, Customs Tariff Number, Tariff Classification.

PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF

PLASTICS AND ARTICLES THEREOF

OTHER PLATES, SHEETS, FILM, FOIL AND STRIP, OF PLASTICS, NON-CELLULAR AND NOT REINFORCED, LAMINATED, SUPPORTED OR SIMILARLY COMBINED WITH OTHER MATERIALS

Select the tariff heading that matches your search

3920100000	- Of polymers of ethylene
	- - Of a thickness not exceeding 0,125\|mm
	- - - Of polyethylene having a specific gravity of
	- - - - Less than 0,94
3920102300	- - - - - Polyethylene film, of a thickness of 20\|micrometres or more but not exceeding 40\|micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits	BTI Select
3920102400	- - - - - Stretch film, not printed
3920102410	- - - - - - For use in certain types of aircraft	BTI Select
3920102490	- - - - - - Other	BTI Select
3920102500	- - - - - Other
3920102505	- - - - - - For use in certain types of aircraft	BTI Select
	- - - - - - Other
3920102510	- - - - - - - Film of a thickness of not more than 0,20\|mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber	BTI Select
	- - - - - - Other
3920102520	- - - - - - - Film of polyethylene, of a kind used for typewriter ribbon	BTI Select
3920102590	- - - - - - - Other	BTI Select
3920102800	- - - - 0,94\|or more
3920102810	- - - - - For use in certain types of aircraft	BTI Select
	- - - - - Other
3920102830	- - - - - - Printed embossed\|film -\|of polymers of ethylene -\|having a\|gravity of 0,94g/cm3\|or more -\|of a thickness of 0,019mm ±\| 0,003mm -\|with permanent graphics consisting of two different alternating designs whose individual length is 525\|mm or more	BTI Select
3920102891	- - - - - - Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics: -\|is repetitive and equally spaced along the length of the film -\|is equally and visibly aligned when viewed from the back or front of the film	BTI Select
3920102893	- - - - - - Polyethylene foil: -\|with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces, -\|of a total thickness of 0,025\|mm or more, but not more than 0,7\|mm, and -\|of a total width of 6\|cm or more, but not more than 1\|m, -\|whether or not in rolls, of a kind used for the protection of the surface of products of headings 8521\|and 8528	BTI Select
3920102899	- - - - - - Other	BTI Select
3920104000	- - - Other
3920104010	- - - - For use in certain types of aircraft	BTI Select
	- - - - Other
3920104030	- - - - - Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalized polymers of ethylene, consisting of: -\|a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, -\|covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110\|µm	BTI Select
	- - - - Other
3920104040	- - - - - Tubular layered film predominately of polyethylene: -\|consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on\| either side with a layer of polyamide, covered on either side with at least one layer of polyethylene, -\|having a total thickness of 55\|µm or more, -\|having a diameter of 500\|mm or more but not more than 600\|mm	BTI Select
3920104099	- - - - - Other	BTI Select
	- - Of a thickness exceeding 0,125\|mm
3920108100	- - - Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15\|%, containing poly(vinyl alcohol) dissolved in water as the moistening agent	BTI Select
3920108900	- - - Other
3920108910	- - - - For use in certain types of aircraft	BTI Select
	- - - - Other
3920108920	- - - - - Film of a thickness of not more than 0,20\|mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber	BTI Select
	- - - - Other
3920108925	- - - - - Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs	BTI Select
3920108930	- - - - - Ethylene vinyl acetate (EVA) film with: -\|a raised relief surface with embossed undulations, and -\|a thickness of more than 0,125\|mm	BTI Select
3920108940	- - - - - Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8\|mm or more but not exceeding 1.2\|mm	BTI Select
3920108950	- - - - - Polyethylene foil: -\|with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces, -\|of a total thickness of 0,025\|mm or more, but not more than 0,7\|mm, and -\|of a total width of 6\|cm or more, but not more than 1\|m, -\|whether or not in rolls, of a kind used for the protection of the surface of products of headings 8521\|and 8528	BTI Select
3920108990	- - - - - Other	BTI Select
3920200000	- Of polymers of propylene
	- - Of a thickness not exceeding 0,10\|mm
3920202100	- - - Biaxially oriented
3920202110	- - - - For use in certain types of aircraft	BTI Select
3920202130	- - - - Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5\|µm or more but not more than 13,5\|µm	BTI Select
3920202140	- - - - Sheets of biaxially - oriented polypropylene\|film: -\|with the thickness of not more than 0,1\|mm, -\|printed on both sides with specialised coatings to allow banknote security printing	BTI Select
3920202190	- - - - Other	BTI Select
3920202900	- - - Other
3920202910	- - - - For use in certain types of aircraft	BTI Select
	- - - - Other
3920202950	- - - - - Sheet of polypropylene in the form of a roll: -\|with a thickness of not more than 30\|μm, -\|of a width of not more than 210\|mm, -\|conforming to ASTM\|D882,for use in the manufacture of separators for lithium-ion electric vehicle batteries	BTI Select
	- - - - Other
3920202955	- - - - - Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of: -\|a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, -\|covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110\|µm	BTI Select
	- - - - Other
3920202960	- - - - - Mono-axial oriented film, of a total thickness of not more than 75µm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: -\|a tensile strength in the machine direction of 120\|MPa or more but not more than 270\|MPa and -\|a tensile strength in the transverse direction of 10\|MPa or more but not more than 40\|MPa as determined by test method ASTM D882/ISO 527-3	BTI Select
3920202970	- - - - - Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: -\|a thickness of 55\|µm or more but not more than 97\|µm, -\|a tensile modulus in the machine direction of 0,30\|GPa or more but not more than 1,45\|GPa, and -\|a tensile modulus in the transverse direction of 0,20\|GPa or more but not more than 0,70\|GPa	BTI Select
3920202992	- - - - - Película de orientación mono-axial, de un grosor no superior a 75µm, compuesta por tres capas, cada una de las cuales contiene una mezcla de polipropileno y polietileno, con una capa interior compuesta o no por dióxido de titanio, con: -\|una resistencia a la rotura por tracción en la dirección longitudinal igual o superior a 140MPa pero no superior a 270MPa, y -\|una resistencia a la rotura por tracción en la dirección transversal igual o superior a 20MPa pero no superior a 40MPa determinadas mediante el método ASTM D882/ISO 527-3	BTI Select
3920202993	- - - - - Hoja orientada monoaxialmente, constituida por tres capas, cada una de las cuales está constituida por una mezcla de polipropileno y de un copolímero de etileno y de acetato de vinilo, con: -\|un espesor superior o igual a 55\|µm pero inferior o igual a 97\|µm, -\|un módulo de elasticidad en el sentido de la máquina superior o igual a 0,75\|GPa pero inferior o igual a 1,45\|GPa y -\|un módulo de elasticidad en el sentido transversal superior o igual a 0,20\|GPa pero inferior o igual a 0,55\|GPa	BTI Select
3920202994	- - - - - Co-extruded trilayer film, • each layer containing a mixture of polypropylene and polyethylene, • containing not more than 3% by weight of other polymers, • whether or not containing titanium dioxide in the core layer, • of an overall thickness of not more than 70 µm	BTI Select
3920202999	- - - - - Other	BTI Select
3920208000	- - Of a thickness exceeding 0,10\|mm
3920208010	- - - For use in certain types of aircraft	BTI Select
3920208090	- - - Other	BTI Select
	- - - Other
3920208092	- - - - Laminated sheet or strip, consisting of a film of a thickness of 181\|µm or more but not more than 223\|µm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester	BTI Select
3920208093	- - - - Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of: -\|a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, -\|covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110\|µm	BTI Select
3920208095	- - - - Polypropylene sheet, put up in rolls, with: -\|flame retardant level of UL 94\|V-0\|for material thicknesses of 0,25\|mm or more and level UL 94\|VTM-0\|for material thicknesses of 0,05\|mm or more but not more than 0,25\|mm (as determined by Flammability Standard UL-94) -\|dielectric breakdown of 13,1\|kV or more but not more than 60,0\|kV(as determined by ASTM D149) -\|tensile yield in a machine direction of 30\|MPa or more but not more than 33\|MPa (as determined by ASTM D882) -\|tensile yield in a transverse direction of 22\|MPa or more but not more than 25\|MPa (as determined by ASTM D882) -\|density range of 0,988\|g/cm$3\|or more but not more than 1,035\|g/cm$3\|(as determined by ASTM D792) -\|moisture absorption of 0,01\|% or more but not more than 0,06\|% (as determined by ASTM D570) for use in the manufacture of insulators used in the electronics and electrical industries	BTI Select
3920208099	- - - - Other	BTI Select
3920300000	- Of polymers of styrene
3920300010	- - Acrylonitrile-butadiene-styrene, for use in certain types of aircraft	BTI Select
3920300090	- - Other	BTI Select
	- Of polymers of vinyl chloride
3920430000	- - Containing by weight not less than 6\|% of plasticisers
3920431000	- - - Of a thickness not exceeding 1\|mm
3920431010	- - - - For use in certain types of aircraft	BTI Select
	- - - - Other
3920431092	- - - - - Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60\|µm or more but not more than 80\|µm, containing 30\|or more but not more than 40\|parts of plasticizer to 100\|parts of poly(vinyl chloride)	BTI Select
3920431094	- - - - - Film of a specular gloss of 70\|or more, measured at an angle of 60\|° using a glossmeter (as determined by the ISO 2813:2000\|method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26\|mm or more but not more than 1,0\|mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1\|000\|mm or more but not more than 1\|450\|mm, for use in the manufacture of goods of heading\|9403	BTI Select
3920431095	- - - - - Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet	BTI Select
3920431099	- - - - - Other	BTI Select
3920439000	- - - Of a thickness exceeding 1\|mm
3920439010	- - - - For use in certain types of aircraft	BTI Select
3920439090	- - - - Other	BTI Select
3920490000	- - Other
3920491000	- - - Of a thickness not exceeding 1\|mm
3920491010	- - - - For use in certain types of aircraft	BTI Select
	- - - - Other
3920491030	- - - - - Film of a (polyvinyl)chloride-copolymer -\|containing by weight 45\|% or more of fillers -\|on a support	BTI Select
3920491093	- - - - - Film of a specular gloss of 70\|or more, measured at an angle of 60\|° using a glossmeter (as determined by the ISO 2813:2000\|method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26\|mm or more but not more than 1,0\|mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1\|000\|mm or more but not more than 1\|450\|mm, for use in the manufacture of goods of heading\|9403	BTI Select
3920491095	- - - - - Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride) -\|whether or not with a pressure or heat sensitive adhesive layer -\|whether or not with a release film -\|with a toxicity (as determined by test method ABD\|0031) of not more than 70\|ppm hydrogen fluoride, not more than 120\|ppm hydrogen chloride, not more than 10\|ppm hydrogen cyanide, not more than 10\|ppm nitrogen oxides, not more than 300\|ppm carbon monoxide and not more than 10\|ppm dihydrogen sulphide and sulphur dioxide taken together -\|with a flammability within 60\|seconds of not more than 130\|mm (as determined by test method FAR 25\|App.F Pt. I Amdt.83) -\|with a weight (without release film) of 240\|g/m$2\|(±\|30\|g/m$2) without adhesive layer, of\|340\|g/m$2\|(±\|40\|g/m$2) with heat sensitive adhesive layer or of 330\|g/m$2\|(±\|40\|gm$2) with pressure sensitive layer	BTI Select
3920491099	- - - - - Other	BTI Select
3920499000	- - - Of a thickness exceeding 1\|mm
3920499010	- - - - For use in certain types of aircraft	BTI Select
3920499090	- - - - Other	BTI Select
	- Of acrylic polymers
3920510000	- - Of poly(methyl methacrylate)
3920510020	- - - Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5\|mm or more but not more than 19\|mm	BTI Select
3920510030	- - - Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 90μm	BTI Select
3920510040	- - - Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)	BTI Select
3920510050	- - - Sheets of polymethylmethacrylate conforming to standard — EN 4364 (MIL-P-5425E) and DTD5592A, or — EN 4365 (MIL-P-8184) and DTD5592A	BTI Select
3920510090	- - - Other	BTI Select
3920590000	- - Other
3920591000	- - - Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150\|micrometres	BTI Select
3920599000	- - - Other	BTI Select
3920599010	- - - - Non-cellular and non-laminated sheet of modified copolymer of acrylonitrile-methyl acrylate with a thickness of 1.0\|mm or more but not more than 1.3\|mm, put up in rolls	BTI Select
3920599030	- - - - Non-self adhesive reflecting film, consisting of several layers including: -\|a copolymer of acrylic resin -\|polyurethane -\|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use -\|glass microspheres, and -\|a permanent liner of poly(ethyleneterephthalate)	BTI Select
3920599090	- - - - other	BTI Select
	- Of polycarbonates, alkyd resins, polyallyl esters or other polyesters
3920610000	- - Of polycarbonates
3920610030	- - - Reflecting sheet: -\|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -\|covered on one or both sides with one or more layers of plastic or metallisation, and -\|whether or not covered on one side with a self-adhesive layer and a release sheet	BTI Select
3920610090	- - - Other	BTI Select
3920620000	- - Of poly(ethylene terephthalate)
	- - - Of a thickness not exceeding 0,35\|mm
3920621200	- - - - Poly(ethylene terephthalate) film, of a thickness of 72\|micrometres or more but not exceeding 79\|micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100\|micrometres or more but not exceeding 150\|micrometres, for the manufacture of photopolymer printing plates	BTI Select
3920621900	- - - - Other
3920621902	- - - - - Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50\|µm or more but not more than 350\|µm, consisting especially of a layer containing carbon black	BTI Select
3920621905	- - - - - Poly(ethylene terephthalate) film in rolls: -\|with a thickness of 0,335\|mm or more but not more than 0,365\|mm, and -\|coated with a gold layer with a\|thickness of 0,03\|μm or more but not more than 0,06\|μm	BTI Select
3920621908	- - - - - Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25\|µm, either: -\|only dyed in the mass, or -\|dyed in the mass and metallised on one side	BTI Select
3920621912	- - - - - Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120\|µm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material	BTI Select
3920621918	- - - - - Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120\|µm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material	BTI Select
3920621920	- - - - - Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers	BTI Select
3920621938	- - - - - Poly(ethylene terephthalate) film, of a thickness of not more than 12\|µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35\|nm	BTI Select
3920621948	- - - - - Sheets or rolls of poly(ethylene terephthalate): -\|coated on both sides with a layer of epoxy acrylic resin, -\|of a total thickness of 37\|μm (±\|3\|μm)	BTI Select
3920621952	- - - - - Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1\|% of aluminium, of a thickness of not more than 300\|µm and having a surface resistivity of not more than 10\|000\|ohms (per square) (as determined by the ASTM D 257-99\|method)	BTI Select
3920621960	- - - - - Poly (ethylene terephtalate) film: -\|of a thickness of not more than 20\|µm, -\|coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm	BTI Select
3920621973	- - - - - Iridescent film of polyester and poly(methyl methacrylate)	BTI Select
3920621976	- - - - - Transparent poly(ethylene terephthalate) film: -\|coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7\|nm or more but not more than 80\|nm, -\|with a surface tension of 36\|Dyne/cm or more but not more than 39\|Dyne/cm, -\|with a light transmission of more than 93\|%, -\|with a haze value of not more than 1,3\|%, -\|with a total thickness of 10\|µm or more but not more than 350\|µm, -\|with a width of 800\|mm or more but not more than\|1\|600\|mm	BTI Select
3920621999	- - - - - Other	BTI Select
3920629000	- - - Of a thickness exceeding 0,35\|mm
3920629010	- - - - Poly(ethylene terephthalate) film in rolls: -\|with a thickness of 0,335\|mm or more but not more than 0,365\|mm, and -\|coated with a gold layer with a\|thickness of 0,03\|μm or more but not more than 0,06\|μm	BTI Select
3920629090	- - - - Other	BTI Select
3920630000	- - Of unsaturated polyesters	BTI Select
3920690000	- - Of other polyesters
3920690020	- - - Film of poly(ethylene naphthalene-2,6-dicarboxylate)	BTI Select
3920690040	- - - Iridescent film of polyester and poly(methyl methacrylate)	BTI Select
3920690050	- - - Monolayer, biaxially oriented film: -\|composed of more than 85\|% by weight of poly(lactic acid) and not more than 10,50\|% by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc, -\|having a thickness of 20\|µm or more but not more than 120\|µm -\|biodegradable and compostable (as determined by the method \|EN 13432)	BTI Select
3920690060	- - - Monolayer, transverse oriented, shrink film: -\|composed of more than 80\|% by weight of poly(lactic acid) and not more than 15,75\|% by weight of additives of modified poly(lactic acid), -\|having a thickness of 45\|µm or more but not more than 50\|µm, -\|biodegradable and compostable (as determined by the method \|EN 13432)	BTI Select
3920690090	- - - Other	BTI Select
	- Of cellulose or its chemical derivatives
3920710000	- - Of regenerated cellulose	BTI Select
3920730000	- - Of cellulose acetate
3920731000	- - - Film in rolls or in strips, for cinematography or photography	BTI Select
3920738000	- - - Other	BTI Select
3920790000	- - Of other cellulose derivatives
3920791000	- - - Of vulcanised fibre
3920791010	- - - - Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5\|mm	BTI Select
3920791090	- - - - Other	BTI Select
3920799000	- - - Other	BTI Select
	- Of other plastics
3920910000	- - Of poly(vinyl butyral)
3920910010	- - - For use in certain types of aircraft	BTI Select
	- - - Other
3920910051	- - - - Poly(vinyl butyral) film containing by weight 25\|% or more but not more than 28\|% of tri-isobutyl phosphate as a plasticiser	BTI Select
3920910052	- - - - Poly(vinyl butyral) film: -\|containing by weight\| 26\|% or more but not more than\|30\|% of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser, -\|with a thickness\|of 0,73\|mm or more but not more than 1,50\|mm	BTI Select
3920910091	- - - - Poly(vinyl butyral) film having a graduated coloured band	BTI Select
3920910093	- - - - Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: -\|a visible light transmission of 50\|% or more, -\|coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral), -\|a total thickness of not more than 0,2\|mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2\|mm	BTI Select
	- - - - Co-extruded trilayer poly(vinyl butyral) film
3920910095	- - - - - Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29\|% or more but not more than 31\|% of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser	BTI Select
3920910097	- - - - - Other	BTI Select
3920910099	- - - - Other	BTI Select
3920920000	- - Of polyamides	BTI Select
3920920030	- - - Polyamide film: -\|of a thickness of not more than 20\|µm, -\|coated on at least one side with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2\|µm	BTI Select
3920920089	- - - Other	BTI Select
3920930000	- - Of amino-resins	BTI Select
3920940000	- - Of phenolic resins	BTI Select
3920990000	- - Of other plastics
	- - - Of condensation or rearrangement polymerisation products, whether or not chemically modified
3920992100	- - - - Polyimide sheet and strip, uncoated, or coated or covered solely with plastic	BTI Select
3920992800	- - - - Other
3920992835	- - - - - Polyether imide sheets, in rolls, with -\|a thickness of 5\|µm or more, but not more than 14\|µm, -\|a width of 478\|mm or more, but not more than 532\|mm, -\|a tensile strength at break of 78\|MPa or more (as determined by JIS C-2318\|for a film thickness of 50\|µm), -\|an elongation at break of 50\|% or more (as determined by JIS C-2318\|for a film thickness of 50\|µm), -\|a glass transition point (Tg) of 226\|°C, -\|a continuous service temperature of 180\|°C (as determined by UL-746\|B for a film thickness of 50\|µm), -\|a flammability of VTM-0\|(as determined by UL 94\|for a film thickness of 25\|µm)	BTI Select
3920992840	- - - - - Polymer film containing the following monomers: -\|poly (tetramethylene ether glycol), -\|bis (4-isocyanotocyclohexyl) methane, -\|1,4-butanediol or 1,3-butanediol, -\|with a thickness of 0,25\|mm or more but not more than 5,0\|mm, -\|embossed with a regular pattern on one surface, -\|and covered with a release sheet	BTI Select
3920992845	- - - - - Transparent polyurethane film metallised on one side: -\|with a gloss of more than 90\|degrees according to ASTM\|D2457 -\|covered on the metalized side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer -\|covered on the other side with a protective poly(ethylene terephthalate) film -\|with a total thickness of more than 204\|µm but not more than 244\|µm	BTI Select
3920992850	- - - - - Thermoplastic polyurethane film, of a thickness of 250\|μm or more but not more than 350\|μm, covered on one side with a removable protective film	BTI Select
3920992855	- - - - - Thermoplastic polyurethane film extruded, with : -\|not self-adhesive, -\|an index of yellow lower of more than 1,0\|but not more than 2,5\|for 10\|mm stacked films (as determined by test method ASTM\|E\|313-10), -\|a light transmission higher to 87\|% for 10\|mm stacked films (as determined by test method ASTM\|D\|1003-11), -\|a total thickness of 0,38\|mm or more, but not more than 7,6\|mm, -\|a width of 99\|cm or more, but not more than 305\|cm, of a kind used in the production of laminated safety glass	BTI Select
3920992860	- - - - - Silicone tape, plate or strip: -\|of a total thickness of 2\|mm or more, but not more than\|9\|mm, -\|of a total width of 12\|mm or more, but not more than 65\|mm, for use in the manufacture of products of headings 8521\|or 8528	BTI Select
3920992865	- - - - - Matt, thermoplastic polyurethane foil in rolls with: -\|a width of 1640\|mm\| (± 10\|mm), -\|a gloss of 3,3\|degrees or more but not more than 3,8\|(as determined by the method ASTM D2457), -\|a surface roughness of 1,9\|Ra or more but not more than 2,8\|Ra (as determined by the method ISO 4287), -\|a thickness of more than 365\|µm but not more than 760\|µm, -\|a hardness of 90\|(± 4) (as determined by the method: Shore A (ASTM D2240)), -\|an elongation to break of 470\|% (as determined by the method: EN\|ISO\|527)	BTI Select
3920992870	- - - - - Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: -\|microspheres with a coating of metal, whether or not alloyed with gold, -\|an adhesive layer, -\|with a protective\|layer of silicone or poly(ethylene terephthalate) on one\|side,\| -\|with a protective layer of poly(ethylene terephthalate) on the other side, and -\|with a width of 5\|cm or more but not more than 100\|cm -\|with a length of not more than 2\|000\|m	BTI Select
3920992875	- - - - - Thermoplastic polyurethane foil in rolls with: -\|a width of more than 900\|mm but not more than 1016\|mm, -\|a matt finish, -\|a thickness of 0,43\|mm (± 0.03\|mm), -\|an elongation to break of 420\|% or more but not more than 520\|%, -\|a tensile strength of 55\|N/mm$2$ (± 3) (as determined by the method EN ISO 527) -\|a hardness of 90\|(± 4) (as determined by the method: Shore A [ASTM D2240]), -\|wrinkle inside (waves) of 6,35\|mm, -\|a flatness of 0,025\|mm	BTI Select
3920992890	- - - - - Other	BTI Select
	- - - Of addition polymerisation products
3920995200	- - - - Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97\|% or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1\|mm	BTI Select
3920995300	- - - - Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells	BTI Select
3920995900	- - - - Other
3920995910	- - - - - For use in certain types of aircraft	BTI Select
	- - - - - Other
3920995925	- - - - - - Poly(1-chlorotrifluoroethylene) film	BTI Select
3920995950	- - - - - - Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019\|mm or more but not more than 0,14\|mm, impermeable to water vapour	BTI Select
3920995955	- - - - - - Ion-exchange membranes of fluorinated plastic material	BTI Select
3920995960	- - - - - - Películas de copolímeros de alcohol vinílico, solubles en agua fría, de espesor superior o igual a 34\|micrómetros pero inferior o igual a 90\|micrómetros, con una resistencia a la tracción superior o igual a 20\|MPa pero inferior o igual a 45\|MPa y un alargamiento de rotura superior o igual al 250\|% pero inferior o igual al 900\|%	BTI Select
3920995965	- - - - - - Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34\|µm or more but not more than 90\|µm, a tensile strength at break of 20\|MPa or more but not more than 55\|MPa and an elongation at break of 250\|% or more but not more than 900\|%	BTI Select
3920995970	- - - - - - Tetrafluoroethylene film, put up in rolls, with: -\|a\|thickness of 50\|µm, -\|a\|melting point of 260\|°C, and -\|a\|specific gravity of 1,75\|(ASTM D792) for use in the manufacture of semiconductor devices	BTI Select
3920995975	- - - - - - Film of fluorinated ethylene propylene resin (CAS RN 25067-11-2) with: -\|a thickness of 0,010\|mm or more but not more than 0,80\|mm, -\|a width of 1\|219\|mm or more but not more than 1\|575\|mm, and -\|a melting point of 252\|°C (measured according ASTM D-3418)	BTI Select
3920995990	- - - - - - Other	BTI Select
3920999000	- - - Other
3920999020	- - - - Anisotropic conductive film, in rolls, of a width of 1,2\|mm or more but not more than 3,15\|mm and a maximum length of 300\|m, used for joining electronic components in the production of LCD or plasma displays	BTI Select
3920999090	- - - - Other	BTI Select