Other plates, sheets, film, foil and strip, of plastics

PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF

PLASTICS AND ARTICLES THEREOF

OTHER PLATES, SHEETS, FILM, FOIL AND STRIP, OF PLASTICS

Select the tariff heading that matches your search

	- Cellular
3921110000	- - Of polymers of styrene
3921110010	- - - Acrylonitrile butadiene styrene, for use in certain types of aircraft	BTI Select
3921110090	- - - Other	BTI Select
3921120000	- - Of polymers of vinyl chloride
3921120020	- - - For use in certain types of aircraft	BTI Select
3921120090	- - - Other	BTI Select
3921130000	- - Of polyurethanes
3921131000	- - - Flexible
3921131010	- - - - Sheet of polyurethane foam, of a thickness of 3\|mm (±\|15\|%) and of a specific gravity of 0,09435\|or more but not more than 0,10092	BTI Select
3921131020	- - - - Rolls of open-cell polyurethane foam: -\|with a thickness of 2,29\|mm (±\|0,25\|mm), -\|surface-treated with a foraminous adhesion promoter, and -\|laminated to a polyester film and\|a layer of textile material	BTI Select
3921131090	- - - - Other	BTI Select
3921139000	- - - Other	BTI Select
3921140000	- - Of regenerated cellulose
3921140020	- - - Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)	BTI Select
3921140080	- - - Other	BTI Select
3921190000	- - Of other plastics
3921190010	- - - For use in certain types of aircraft	BTI Select
	- - - Other
3921190030	- - - - Blocks with cellular structure, containing by weight: -\|polyamide-6\|or poly(epoxy anhydride) -\|7\|% or more but not more than 9\|% of polytetrafluorethylene if present -\|10\|% or more but not more than 25\|% of inorganic fillers	BTI Select
3921190035	- - - - Multilayer film consisting\|of: -\|30\|% or more but not more than 60\|% of a microporous polypropylene layer (CAS\|RN\|9003\|07-0), -\|20\|% or more but not more than 40\|% of a microporous polyethylene layer (CAS\|RN\|9002-88-4), and -\|20\|% or more but not more than 40\|% of a boehmite layer/coating (CAS\|RN\|1318-23-6), for use in the manufacture of lithium-ion batteries	BTI Select
3921190040	- - - - Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: -\|a width of 98\|mm or more but not more than170\|mm, -\|a thickness of 15\|µm or more but not more than 36\|µm, of a kind used for the manufacture of alkaline battery separators	BTI Select
3921190050	- - - - Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with -\|a total thickness of more than 0,05\|mm but not more than 0,20\|mm, -\|a water entry pressure between 5\|and 200\|kPa according to\|ISO 811, and -\|an air permeability of 0,08\|cm$3/cm$2/s or more according to ISO 5636-5	BTI Select
3921190060	- - - - Multi-porous multilayer separator foil with: -\|one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides, -\|a width of 65\|mm or more but not more than 170\|mm, -\|a total thickness of 0,01\|mm or more but not more than 0,03\|mm, -\|a porosity of 0,25\|or more but not more than 0,65	BTI Select
3921190070	- - - - Microporous membranes of expanded Polytetrafluoroethylene (ePTFE) in rolls, having: -\|a width of 1\|600\|mm or more but not more than 1\|730\|mm, and -\|a membrane thickness of\|15\|μm or more, but not more than 50\|μm for use in the manufacture of a bi-component ePTFE membrane	BTI Select
3921190080	- - - - Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with -\|zero transversal production direction (TD)\|shrinkage, -\|a total thickness of 10\|µm or more but not more than 50\|µm, -\|a width of 15\|mm or more but not more than 900\|mm, -\|a length of more than 200\|m but not more than 3000\|m, and -\|an average pore size between 0,02\|µm and 0,1\|µm	BTI Select
3921190091	- - - - Microporous polypropylene film of a thickness of not more than 100\|µm	BTI Select
3921190093	- - - - Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment	BTI Select
3921190095	- - - - Film of polyethersulfone, of a thickness of not more than 200\|µm	BTI Select
3921190096	- - - - Cellular film, consisting of a layer of polyethylene of a thickness of 90\|µm or more but not more than 140\|µm and a layer of regenerated cellulose of a thickness of 10\|µm or more but not more than 40\|µm	BTI Select
3921190099	- - - - Other	BTI Select
3921900000	- Other
	- - Of condensation or rearrangement polymerisation products, whether or not chemically modified
3921901000	- - - Of polyesters
3921901005	- - - - Corrugated sheet and plates	BTI Select
3921901010	- - - - Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres	BTI Select
3921901020	- - - - Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin	BTI Select
3921901030	- - - - Multilayer film consisting of: -\|a poly(ethylene terephthalate) film with a thickness of more than 100\|µm but not more than 150\|µm, -\|a primer of phenolic material with a thickness of more than 8\|µm but not more than 15\|µm, -\|an adhesive layer of a synthetic rubber with a thickness of more than 20\|µm but not more than 30\|µm, -\|and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35\|µm but not more than 40\|µm	BTI Select
3921901090	- - - - Other	BTI Select
3921903000	- - - Of phenolic resins	BTI Select
	- - - Of amino-resins
	- - - - Laminated
3921904100	- - - - - High-pressure laminates with a decorative surface on one or both sides	BTI Select
3921904300	- - - - - Other	BTI Select
3921904900	- - - - Other	BTI Select
3921905500	- - - Other
3921905520	- - - - Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring: -\|469,9\|mm (±\|2\|mm)\|!x! 622,3\|mm (±\|2\|mm), or -\|469,9\|mm (±\|2\|mm)\|!x! 414,2\|mm (±\|2\|mm), or -\|546,1\|mm (±\|2\|mm)\|!x! 622,3\|mm (±\|2\|mm for use in the manufacture of printed circuit boards	BTI Select
3921905525	- - - - Prepreg sheets or rolls containing polyimide resin	BTI Select
3921905530	- - - - Hojas o rollos de material preimpregnado compuestos por resina epoxi bromada reforzados con fibra de vidrio y: -\|un flujo no superior a 3,6\|mm (determinado mediante IPC-TM 650.2.3.17.2), y -\|una temperatura de transición vítrea (Tg) superior a 170\|°C (determinada mediante IPC-TM 650.2.4.25)\| utilizados para la fabricación de placas de circuitos impresos	BTI Select
3921905535	- - - - Glass fibre impregnated with epoxy resin for use in the manufacture of smart cards	BTI Select
3921905540	- - - - Three layered fabric sheet, in rolls, -\|comprising a core layer of 100\|% Nylon Taffeta or Nylon/Polyester blended Taffeta, -\|coated on both sides with polyamide , -\|of a total thickness not more than 135\|μm, -\|of a total weight not more than 80\|g/m$2	BTI Select
3921905550	- - - - Glass fiber-reinforced sheets of reactive, halogen-free epoxid resin with hardener, additives and inorganic fillers for use in encapsulating semiconductor systems	BTI Select
3921905590	- - - - Other	BTI Select
3921906000	- - Of addition polymerisation products
3921906010	- - - For use in certain types of aircraft	BTI Select
	- - - Other
3921906030	- - - - Heat-, infra- and UV insulating poly(vinyl butyral) film: -\|laminated with a metal layer with a thickness of 0,05\|mm(±0,01\|mm), -\|containing by weight 29,75\|% or more but not more than 40,25\|% of triethyleneglycol di (2-ethyl hexanoate) as plasticizer, -\|with a light transmission of 70\|% or more (as determined by the ISO 9050\|standard); -\|with an UV transmission of\|1\|% or less (as determined by the ISO 9050\|standard); -\|with a total thickness of 0,43\|mm (± 0,043\|mm)	BTI Select
3921906035	- - - - Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells	BTI Select
3921906091	- - - - Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form	BTI Select
3921906093	- - - - Film, of a specular gloss of 30\|or more but not more than 60\|measured at an angle of 60\|° using a glossmeter (as determined by the ISO 2813:2000\|method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), joined by a metallised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances	BTI Select
3921906095	- - - - Printed laminated sheet -\|with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride), -\|on one side covered with a layer of poly(vinyl fluoride), -\|whether or not with a pressure sensitive adhesive layer and a release film on the other side, -\|with a toxicity (as determined by test method ABD\|0031) of not more than 50\|ppm hydrogen fluoride, not more than 85\|ppm hydrogen chloride, not more than 10\|ppm hydrogen cyanide, not more than 10\|ppm nitrogen oxides, not more than 300\|ppm carbon monoxide and not more than 10\|ppm dihydrogen sulphide and sulphur dioxide taken together, -\|with a flammability within 60\|seconds of not more than 110\|mm (as determined by test method FAR 25\|App.F Pt. I Amdt.83), and -\|with a weight (without release film) of 490\|g/m$2\|(±\|45\|g/m$2) without adhesive layer or of 580\|g/m$2\|(±\|50\|g/m$2) with pressure sensitive layer	BTI Select
3921906099	- - - - Other	BTI Select
3921909000	- - Other	BTI Select
3921909010	- - - Roll of polymer-metal laminate comprising: -\|a layer of poly(ethylene terephthalate), -\|a layer of aluminium, -\|a layer of polypropylene, -\|with a width of not more than 275\|mm, -\|a total thickness of not more than 165\|μm, and -\|conforming to ASTM\|D1701-91\|and ASTM\|D882-95A for use in the manufacture of lithium-ion electric vehicle batteries	BTI Select
3921909090	- - - Other	BTI Select

Other plates, sheets, film, foil and strip, of plastics Harmonized System Codes, Taric Code, HS Code, HTS Code, Harmonized Commodity Description, Commodity Codes, Classification of goods, Tariff Nomenclature, Customs Tariff Number, Tariff Classification.