Self-adhesive plates, sheets, film, foil, tape, strip and other f

PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF

PLASTICS AND ARTICLES THEREOF

SELF-ADHESIVE PLATES, SHEETS, FILM, FOIL, TAPE, STRIP AND OTHER FLAT SHAPES, OF PLASTICS, WHETHER OR NOT IN ROLLS

Select the tariff heading that matches your search

3919100000	- In rolls of a width not exceeding 20\|cm
	- - Strips, the coating of which consists of unvulcanised natural or synthetic rubber
3919101200	- - - Of poly(vinyl chloride) or of polyethylene	BTI Select
3919101500	- - - Of polypropylene	BTI Select
3919101900	- - - Other
3919101910	- - - - Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film	BTI Select
3919101920	- - - - Rolls of two-sided adhesive tape: -\|coated with non-vulcanised natural or synthetic rubber -\|with a width of 20\|mm or more but not more than 40\|mm -\|containing silicone, aluminium hydroxide, acryl and urethane	BTI Select
3919101990	- - - - Other	BTI Select
3919108000	- - Other
3919108010	- - - For use in certain types of aircraft	BTI Select
	- - - Other
	- - - Other
3919108025	- - - - Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film	BTI Select
3919108027	- - - - Polyester film: -\|coated on one side\|with an acrylic thermal release adhesive that debonds at temperatures of\|90\|°C or more but not more than\|200\|°C, and a polyester liner, and -\|on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of\|90\|°C or more but not more than\| 200\|°C, and a polyester liner	BTI Select
3919108030	- - - - Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 10 to 20 cm wide, 10 to 210 m long and with a total thickness of 10 to 50 μm, not for retail sale	BTI Select
3919108035	- - - - Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film	BTI Select
3919108037	- - - - Polytetrafluoroethylene film: -\|with a thickness of 100\|µm or more, -\|an elongation at break of not more than 100\|%, -\|coated on one side with a pressure sensitive silicon adhesive	BTI Select
3919108040	- - - - Black poly(vinyl chloride) film: •with a gloss of more than 30 degrees according to ASTM D2457, •whether or not covered on one side with a protective poly(ethylene terephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner	BTI Select
3919108043	- - - - Ethylene vinyl acetate film: -\|of\|a thickness of 100\|µm or more, -\|coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester\|or polypropylene liner	BTI Select
3919108045	- - - - Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38\|mm or more but not more than 1,53\|mm	BTI Select
3919108047	- - - - Polyester, polyurethane or polycarbonate foil: -\|with pressure sensitive silicone polymer adhesive, -\|of a total thickness of not more than 0,7\|mm, -\|of a total width of 1\|cm or more, but not more than 1\|m, -\|whether or not in rolls of a kind used for the protection of the surface of products of headings 8521\|and 8528	BTI Select
3919108050	- - - - Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs	BTI Select
3919108053	- - - - Polyethylene foil: -\|with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces, -\|of a total thickness of 0,025\|mm or more, but not more than 0,7\|mm, and -\|of a total width of 6\|cm or more, but not more than 1\|m, -\|whether or not in rolls, of a kind used for the protection of the surface of products of headings 8521\|and 8528	BTI Select
3919108055	- - - - Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90\|º of more than 25\|N/cm (as determined by the ASTM D 3330\|method)	BTI Select
3919108057	- - - - Reflecting sheet: -\|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -\|covered on one or both sides with one or more layers of plastic or metallisation, and -\|whether or not covered on one side with a self-adhesive layer and a release sheet	BTI Select
3919108060	- - - - Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet	BTI Select
3919108063	- - - - Reflecting film consisting of -\|a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, -\|a layer of an acrylic resin having embedded glass beads, -\|a layer of an acrylic resin hardened by a melamine cross-linking agent, -\|a metal layer, -\|an acrylic adhesive, and -\|a release film	BTI Select
3919108067	- - - - Hoja reflectante autoadhesiva, incluso segmentada: -\|con un patrón regular, -\|con o sin una capa de cinta de aplicación, -\|formada por una película de polímero acrílico seguida por una capa de poli(metacrilato de metilo) o policarbonato con microprismas, -\|incluso con una capa adicional de poliéster y -\|un adhesivo con una hoja de protección amovible	BTI Select
3919108070	- - - - Rolls of polyethylene foil: -\|self-adhesive on one side, -\|of a total thickness of 0,025\|mm or more, but not more than 0,09\|mm, -\|of a total width of 60\|mm or more, but not more than 1\|110\|mm, of a kind used for the protection of the surface of products of headings 8521\|or 8528	BTI Select
3919108073	- - - - Self-adhesive reflecting sheet whether or not in segmented pieces, -\|whether or not containing a watermark, -\|with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: -\|a layer of acrylic or vinyl polymer, -\|a layer of poly(methyl methacrylate)\| or\| polycarbonate containing microprisms, -\|a layer of metallisation, -\|an adhesive layer, and -\|a release sheet -\|whether or not containing an additional layer of polyester	BTI Select
3919108075	- - - - Self adhesive reflecting film, consisting of several layers including: -\|a copolymer of acrylic resin, -\|polyurethane,\| -\|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, -\|glass microspheres, and -\|an adhesive layer, with a release liner on one or both sides	BTI Select
3919108080	- - - - Acrylic tape put up in rolls: -\|self-adhesive on both sides,\| -\|of a total thickness of 0,04\|mm or more, but not more than 1,25\|mm, -\|of a total width of 5\|mm or more but not more than 1\|205\|mmfor use in the manufacture of products of headings 8521\|and 8528	BTI Select
3919108085	- - - - Poly(vinyl chloride) or polyethylene or any other polyolefine film: -\|of\|a thickness of 65\|µm or more, -\|coated on one side\|with an acrylic UV-sensitive adhesive and a polyester liner	BTI Select
3919108090	- - - - Other	BTI Select
3919900000	- Other
3919900010	- - For use in certain types of aircraft	BTI Select
	- - Other
3919900019	- - - Transparent poly(ethylene terephthalate) self-adhesive film: -\|free from impurities or faults, -\|coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound, -\|whether or not with a printable dust-proof layer of modified long chain alkyl organic compound, -\|with a total thickness without the liner of 54\|μm or more but not more than 64\|μm, and -\|a width of more than 1\|295\|mm but not more than 1\|305\|mm	BTI Select
3919900020	- - - Polyester film: -\|coated on one side\|with an acrylic thermal release adhesive that debonds at temperatures of\|90\|°C or more but not more than\|200\|°C, and a polyester liner, and -\|on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of\|90\|°C or more but not more than\| 200\|°C, and a polyester liner	BTI Select
3919900023	- - - Film consisting of 1\|to 3\|laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner	BTI Select
3919900024	- - - Reflecting laminated sheet: -\|consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, -\|covered on both sides with one or more layers of plastic material and -\|covered on one side with an adhesive layer and a release sheet	BTI Select
3919900025	- - - Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner	BTI Select
3919900026	- - - Ethylene vinyl acetate film: -\|of\|a thickness of 100\|µm or more, -\|coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester\|or polypropylene liner	BTI Select
3919900027	- - - Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147\|N/25\|mm and an electrostatic discharge of not more than 500\|V	BTI Select
3919900028	- - - Poly(vinyl chloride) or polyethylene or any other polyolefine film: -\|of\|a thickness of 65\|µm or more, -\|coated on one side\|with an acrylic UV-sensitive adhesive and a polyester liner	BTI Select
3919900029	- - - Polyester film coated on both sides with an acrylic and/or rubber (pressure sensitive) adhesive put up in rolls of a width of 45,7\|cm or more but not more than 132\|cm (supplied with a release liner)	BTI Select
3919900030	- - - Reflecting sheet: -\|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -\|covered on one or both sides with one or more layers of plastic or metallisation, and -\|whether or not covered on one side with a self-adhesive layer and a release sheet	BTI Select
3919900031	- - - Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film	BTI Select
3919900032	- - - Polyester, polyurethane or polycarbonate foil: -\|with pressure sensitive silicone polymer adhesive, -\|of a total thickness of not more than 0,7\|mm, -\|of a total width of 1\|cm or more, but not more than 1\|m, -\|whether or not in rolls of a kind used for the protection of the surface of products of headings 8521\|and 8528	BTI Select
3919900033	- - - Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60\|μm or more, but not more than 70\|μm, and with a width of more than 1\|245\|mm but not more than 1\|255\|mm	BTI Select
3919900034	- - - Polyethylene foil: -\|with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces, -\|of a total thickness of 0,025\|mm or more, but not more than 0,7\|mm, and -\|of a total width of 6\|cm or more, but not more than 1\|m, -\|whether or not in rolls, of a kind used for the protection of the surface of products of headings 8521\|and 8528	BTI Select
3919900035	- - - Reflecting layered sheet on rolls, with a width of more than 20\|cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with: -\|a layer of polyurethane containing glass micro beads, -\|a layer of poly(ethylene vinyl acetate), -\|an adhesive layer, and -\|a release sheet	BTI Select
3919900036	- - - Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride) •\|whether or not with a pressure or heat sensitive adhesive layer •\|whether or not with a release film •\|with a toxicity (as determined by test method ABD\|0031) of not more than 70\|ppm hydrogen fluoride, not more than 120\|ppm hydrogen chloride, not more than 10\|ppm hydrogen cyanide, not more than 10\|ppm nitrogen oxides, not more than 300\|ppm carbon monoxide and not more than 10\|ppm dihydrogen sulphide and sulphur dioxide taken together •\|with a flammability within 60\|seconds of not more than 130\|mm (as determined by test method FAR 25\|App.F Pt. I Amdt.83) •\|with a weight (without release film) of 240\|g/m$2\|(±\|30\|g/m$2) without adhesive layer, of\|340\|g/m$2\|(±\|40\|g/m$2) with heat sensitive adhesive layer or of 330\|g/m$2\|(±\|40\|g/m$2) with pressure sensitive layer	BTI Select
3919900038	- - - Self-adhesive film composed of: -\|a\|top layer predominantly of polyurethane mixed with acrylic polymer emulsions and titanium dioxide, -\|whether or not containing a second layer of a mixture of vinyl acetate-ethylene copolymer and cross-linkable\|vinyl acetate polymer\|emulsions, -\|not more than 6\|% by weight of other additives, -\|a\|pressure sensitive adhesive; and -\|covered on one side with a release liner, -\|whether or not with a separate self-adhesive over laminate protective film, -\|of a total thickness of not more than 400\|µm	BTI Select
3919900039	- - - Poly(vinyl chloride) sheeting, of a thickness of less than 1\|mm, coated with an adhesive in which are embedded glass balls of a diameter of not more than 100\|µm	BTI Select
3919900040	- - - Film, with a total thickness of 40\|µm or more, consisting of one or more layers of transparent polyester film: -\|containing at least one infrared reflective layer with a total normal reflectance according to EN\|12898\|of 80\|% or more -\|having on one side a layer with a normal emissivity according to EN\|12898\|of not more\|than\|0,2 -\|coated on the other side with a pressure sensitive adhesive and a release liner	BTI Select
3919900041	- - - Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs	BTI Select
3919900042	- - - Self-adhesive film composed of: -\|a\|first layer containing a mixture of thermoplastic polyurethane and anti-blocking agent, -\|a\|second layer containing a maleic anhydride copolymer, -\|a\|third layer containing a mixture of low density polyethylene, titanium dioxide and additives, -\|a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment, -\|a\|pressure sensitive adhesive; and -\|covered on one side with a release liner -\|whether or not with a separate self-adhesive over laminate protective film -\|of a total thickness of not more than 400\|μm	BTI Select
3919900043	- - - Black poly(vinyl chloride) film: •with a gloss of more than 30 degrees according to ASTM D2457, •whether or not covered on one side with a protective poly(ethylene terephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner	BTI Select
3919900044	- - - Printed laminated sheet -\|with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride), -\|on one side covered with a layer of poly(vinyl fluoride), -\|whether or not with a pressure sensitive adhesive layer and a release film on the other side, -\|with a toxicity (as determined by test method ABD\|0031) of not more than 50\|ppm hydrogen fluoride, not more than 85\|ppm hydrogen chloride, not more than 10\|ppm hydrogen cyanide, not more than 10\|ppm nitrogen oxides, not more than 300\|ppm carbon monoxide and not more than 10\|ppm dihydrogen sulphide and sulphur dioxide taken together, -\|with a flammability within 60\|seconds of not more than 110\|mm (as determined by test method FAR 25\|App.F Pt. I Amdt.83), and -\|with a weight (without release film) of 490\|g/m$2\|(±\|45\|g/m$2) without adhesive layer or of 580\|g/m$2\|(±\|50\|g/m$2) with pressure sensitive layer	BTI Select
3919900045	- - - Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38\|mm or more but not more than 1,53\|mm	BTI Select
3919900046	- - - Hoja reflectante autoadhesiva, incluso segmentada: -\|con un patrón regular, -\|con o sin una capa de cinta de aplicación, -\|formada por una película de polímero acrílico seguida por una capa de poli(metacrilato de metilo) o policarbonato con microprismas, -\|incluso con una capa adicional de poliéster y -\|un adhesivo con una hoja de protección amovible	BTI Select
3919900047	- - - Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side	BTI Select
3919900048	- - - Película transparente de poli(cloruro de vinilo): -\|revestida por una cara con un adhesivo acrílico sensible a los rayos UV con una resistencia de adherencia de 70\|N/m o más, que se reduce en caso de irradiación, -\|con una capa de protección de polyester, -\|de un grosor total sin soporte antiadherente de 78\|µm o más	BTI Select
3919900049	- - - Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet	BTI Select
3919900050	- - - Self-adhesive reflecting sheet whether or not in segmented pieces, -\|whether or not containing a watermark, -\|with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: -\|a layer of acrylic or vinyl polymer, -\|a layer of poly(methyl methacrylate)\| or\| polycarbonate containing microprisms, -\|a layer of metallisation, -\|an adhesive layer, and -\|a release sheet -\|whether or not containing an additional layer of polyester	BTI Select
3919900051	- - - Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 90μm, covered on one side with an adhesive layer and a release sheet	BTI Select
3919900052	- - - White polyolefin tape consisting of: -\|an adhesive layer based on synthetic rubber with a thickness of 8\|µm or more but not more than 17\|µm, -\|a polyolefin layer with a thickness of 28\|µm or more but not more than 40\|µm, and -\|a non-silicone release layer with a thickness below 1\|µm	BTI Select
3919900053	- - - Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90\|º of more than 25\|N/cm (as determined by the ASTM D 3330\|method)	BTI Select
3919900054	- - - Poly(vinyl chloride) film, whether or not covered on one side with a layer of polymer, with -\|an acrylic adhesive with an adhesive strength of 70\|N/m or more whether or not reduced upon irradiation, -\|a total thickness without release liner of 78\|microns or more, and -\|a release liner, whether or not equipped with oblate spheres and on one side embossed	BTI Select
3919900060	- - - Reflecting film containing: -\|a poly(vinyl chloride) layer, -\|a polyurethane layer, -\|a glass microspheres layer, -\|a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view, -\|a metallised aluminium layer, and -\|an adhesive, covered on one side with a release liner	BTI Select
3919900063	- - - Co-extruded trilayer film, -\|each layer containing a mixture of polypropylene and polyethylene, -\|containing not more than 3\|% by weight of other polymers, -\|whether or not containing titanium dioxide in the core layer, -\|coated with an acrylic pressure sensitive adhesive and -\|with a release liner -\|of an overall thickness of not more than 110\|µm	BTI Select
3919900065	- - - Self-adhesive film with a thickness of 40 µm or more, but not more than 400 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner	BTI Select
3919900067	- - - Self-adhesive plastic film consisting of: -\|a poly(olefin) layer with a thickness of more than 95\|but not more than 110\|microns -\|an adhesive layer with a thickness of more than 5\|but not more than 15\|microns -\|a layer based on epoxy resin, with a thickness of more than 4\|but not more than 100\|microns -\|a liner consisting of poly(ethylene terephthalate) with a thickness of more than 35\|but not more than 40\|microns	BTI Select
3919900070	- - - Self-adhesive polishing discs of microporous polyurethane, whether or not\|coated with a\|pad	BTI Select
3919900075	- - - Rolls of polyethylene foil: -\|self-adhesive on one side, -\|of a total thickness of 0,025\|mm or more, but not more than 0,09\|mm, -\|of a total width of 60\|mm or more, but not more than 1\|110\|mm, of a kind used for the protection of the surface of products of headings 8521\|or 8528	BTI Select
3919900080	- - - Self adhesive reflecting film, consisting of several layers including: -\|a copolymer of acrylic resin, -\|polyurethane,\| -\|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, -\|glass microspheres, and -\|an adhesive layer, with a release liner on one or both sides	BTI Select
3919900081	- - - Film of a minimum thickness of 0,36\|mm, consisting of the following: -\|an embossed polyester layer, -\|a caprolactone-cyclohexylene isocyanate copolymer layer, -\|a pressure sensitive adhesive and covered on one side with a release liner	BTI Select
3919900083	- - - Acrylic tape put up in rolls: -\|self-adhesive on both sides,\| -\|of a total thickness of 0,04\|mm or more, but not more than 1,25\|mm, -\|of a total width of 5\|mm or more but not more than 1\|205\|mmfor use in the manufacture of products of headings 8521\|and 8528	BTI Select
3919900085	- - - Multi-layered film of poly(methyl methacrylate) and metallised layers of silver and copper: -\|having a minimum reflectance of 93,5\|% as determined by ASTM G173-03, -\|covered on one side with a removable layer of polyethylene, -\|covered on the other side with an acrylic pressure sensitive adhesive and a siliconised polyester liner	BTI Select
3919900087	- - - Self adhesive transparent film, having a transmittance of more than 90\|% and a haze of less than 3\|% (as determined by ASTM D1003), consisting of several layers including: -\|an acrylic adhesive layer with a thickness of 20\|µm or more but not more than 70\|µm, -\|a polyurethane based layer with a thickness of 100\|µm or more but not more than 300\|µm	BTI Select
3919900088	- - - Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers	BTI Select
3919900099	- - - Other	BTI Select
3919902000	- - Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers	BTI Select
3919908000	- - Other
3919908010	- - - For use in certain types of aircraft	BTI Select
	- - - Other
3919908019	- - - - Transparent poly(ethylene terephthalate) self-adhesive film: -\|free from impurities or faults, -\|coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound, -\|whether or not with a printable dust-proof layer of modified long chain alkyl organic compound, -\|with a total thickness without the liner of 54\|μm or more but not more than 64\|μm, and -\|a width of more than 1\|295\|mm but not more than 1\|305\|mm	BTI Select
3919908020	- - - - Polyester film: -\|coated on one side\|with an acrylic thermal release adhesive that debonds at temperatures of\|90\|°C or more but not more than\|200\|°C, and a polyester liner, and -\|on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of\|90\|°C or more but not more than\| 200\|°C, and a polyester liner	BTI Select
3919908021	- - - - Polytetrafluoroethylene film, -\|with a thickness of 50\|µm or more but not more than 155\|µm, -\|with a width of 6,30\|mm or more but not more than 585\|mm, -\|an elongation at break of not more than 200\|%, and -\|coated on one side with a pressure sensitive silicone adhesive with a thickness\|of not more than 40\|µm	BTI Select
3919908022	- - - - Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7\|cm or more but not more than 160\|cm	BTI Select
3919908023	- - - - Film consisting of 1\|to 3\|laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner	BTI Select
3919908024	- - - - Reflecting laminated sheet: -\|consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, -\|covered on both sides with one or more layers of plastic material and -\|covered on one side with an adhesive layer and a release sheet	BTI Select
3919908025	- - - - Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner	BTI Select
3919908026	- - - - Ethylene vinyl acetate film: -\|of\|a thickness of 100\|µm or more, -\|coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester\|or polypropylene liner	BTI Select
3919908027	- - - - Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147\|N/25\|mm and an electrostatic discharge of not more than 500\|V	BTI Select
3919908028	- - - - Poly(vinyl chloride) or polyethylene or any other polyolefine film: -\|of\|a thickness of 65\|µm or more, -\|coated on one side\|with an acrylic UV-sensitive adhesive and a polyester liner	BTI Select
3919908029	- - - - Polyester film coated on both sides with an acrylic and/or rubber (pressure sensitive) adhesive put up in rolls of a width of 45,7\|cm or more but not more than 132\|cm (supplied with a release liner)	BTI Select
3919908030	- - - - Reflecting sheet: -\|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -\|covered on one or both sides with one or more layers of plastic or metallisation, and -\|whether or not covered on one side with a self-adhesive layer and a release sheet	BTI Select
3919908031	- - - - Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film	BTI Select
3919908032	- - - - Polyester, polyurethane or polycarbonate foil: -\|with pressure sensitive silicone polymer adhesive, -\|of a total thickness of not more than 0,7\|mm, -\|of a total width of 1\|cm or more, but not more than 1\|m, -\|whether or not in rolls of a kind used for the protection of the surface of products of headings 8521\|and 8528	BTI Select
3919908033	- - - - Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60\|μm or more, but not more than 70\|μm, and with a width of more than 1\|245\|mm but not more than 1\|255\|mm	BTI Select
3919908034	- - - - Polyethylene foil: -\|with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces, -\|of a total thickness of 0,025\|mm or more, but not more than 0,7\|mm, and -\|of a total width of 6\|cm or more, but not more than 1\|m, -\|whether or not in rolls, of a kind used for the protection of the surface of products of headings 8521\|and 8528	BTI Select
3919908035	- - - - Reflecting layered sheet on rolls, with a width of more than 20\|cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with: -\|a layer of polyurethane containing glass micro beads, -\|a layer of poly(ethylene vinyl acetate), -\|an adhesive layer, and -\|a release sheet	BTI Select
3919908036	- - - - Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride) •\|whether or not with a pressure or heat sensitive adhesive layer •\|whether or not with a release film •\|with a toxicity (as determined by test method ABD\|0031) of not more than 70\|ppm hydrogen fluoride, not more than 120\|ppm hydrogen chloride, not more than 10\|ppm hydrogen cyanide, not more than 10\|ppm nitrogen oxides, not more than 300\|ppm carbon monoxide and not more than 10\|ppm dihydrogen sulphide and sulphur dioxide taken together •\|with a flammability within 60\|seconds of not more than 130\|mm (as determined by test method FAR 25\|App.F Pt. I Amdt.83) •\|with a weight (without release film) of 240\|g/m$2\|(±\|30\|g/m$2) without adhesive layer, of\|340\|g/m$2\|(±\|40\|g/m$2) with heat sensitive adhesive layer or of 330\|g/m$2\|(±\|40\|g/m$2) with pressure sensitive layer	BTI Select
3919908037	- - - - Polyethylene or polycarbonate film, cut into ready to use forms, -\|one side partly printed whereby part of the printing either gives information about the meaning of LED's visible at the unprinted areas, or marks those points which must be touched to operate the system, -\|the other side partly covered with an adhesive layer, -\|both sides covered with a release liner, and -\|with dimensions of not more than 14\|cm x 2,5\|cm, for use in the manufacture of push-button switches for mechatronic system adjustable furniture	BTI Select
3919908038	- - - - Self-adhesive film composed of: -\|a\|top layer predominantly of polyurethane mixed with acrylic polymer emulsions and titanium dioxide, -\|whether or not containing a second layer of a mixture of vinyl acetate-ethylene copolymer and cross-linkable\|vinyl acetate polymer\|emulsions, -\|not more than 6\|% by weight of other additives, -\|a\|pressure sensitive adhesive; and -\|covered on one side with a release liner, -\|whether or not with a separate self-adhesive over laminate protective film, -\|of a total thickness of not more than 400\|µm	BTI Select
3919908039	- - - - Poly(vinyl chloride) sheeting, of a thickness of less than 1\|mm, coated with an adhesive in which are embedded glass balls of a diameter of not more than 100\|µm	BTI Select
3919908040	- - - - Film, with a total thickness of 40\|µm or more, consisting of one or more layers of transparent polyester film: -\|containing at least one infrared reflective layer with a total normal reflectance according to EN\|12898\|of 80\|% or more -\|having on one side a layer with a normal emissivity according to EN\|12898\|of not more\|than\|0,2 -\|coated on the other side with a pressure sensitive adhesive and a release liner	BTI Select
3919908041	- - - - Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs	BTI Select
3919908042	- - - - Self-adhesive film composed of: -\|a\|first layer containing a mixture of thermoplastic polyurethane and anti-blocking agent, -\|a\|second layer containing a maleic anhydride copolymer, -\|a\|third layer containing a mixture of low density polyethylene, titanium dioxide and additives, -\|a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment, -\|a\|pressure sensitive adhesive; and -\|covered on one side with a release liner -\|whether or not with a separate self-adhesive over laminate protective film -\|of a total thickness of not more than 400\|μm	BTI Select
3919908043	- - - - Black poly(vinyl chloride) film: •with a gloss of more than 30 degrees according to ASTM D2457, •whether or not covered on one side with a protective poly(ethylene terephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner	BTI Select
3919908044	- - - - Printed laminated sheet -\|with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride), -\|on one side covered with a layer of poly(vinyl fluoride), -\|whether or not with a pressure sensitive adhesive layer and a release film on the other side, -\|with a toxicity (as determined by test method ABD\|0031) of not more than 50\|ppm hydrogen fluoride, not more than 85\|ppm hydrogen chloride, not more than 10\|ppm hydrogen cyanide, not more than 10\|ppm nitrogen oxides, not more than 300\|ppm carbon monoxide and not more than 10\|ppm dihydrogen sulphide and sulphur dioxide taken together, -\|with a flammability within 60\|seconds of not more than 110\|mm (as determined by test method FAR 25\|App.F Pt. I Amdt.83), and -\|with a weight (without release film) of 490\|g/m$2\|(±\|45\|g/m$2) without adhesive layer or of 580\|g/m$2\|(±\|50\|g/m$2) with pressure sensitive layer	BTI Select
3919908045	- - - - Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38\|mm or more but not more than 1,53\|mm	BTI Select
3919908047	- - - - Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side	BTI Select
3919908049	- - - - Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet	BTI Select
3919908050	- - - - Self-adhesive reflecting sheet whether or not in segmented pieces, -\|whether or not containing a watermark, -\|with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: -\|a layer of acrylic or vinyl polymer, -\|a layer of poly(methyl methacrylate)\| or\| polycarbonate containing microprisms, -\|a layer of metallisation, -\|an adhesive layer, and -\|a release sheet -\|whether or not containing an additional layer of polyester	BTI Select
3919908051	- - - - Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 90μm, covered on one side with an adhesive layer and a release sheet	BTI Select
3919908052	- - - - White polyolefin tape consisting of: -\|an adhesive layer based on synthetic rubber with a thickness of 8\|µm or more but not more than 17\|µm, -\|a polyolefin layer with a thickness of 28\|µm or more but not more than 40\|µm, and -\|a non-silicone release layer with a thickness below 1\|µm	BTI Select
3919908053	- - - - Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90\|º of more than 25\|N/cm (as determined by the ASTM D 3330\|method)	BTI Select
3919908054	- - - - Poly(vinyl chloride) film, on one side covered with - a polymer layer - an adhesive layer - a release liner, on one side embossed, containing oblate spheres; whether or not on the other side covered with an adhesive layer and a metallised polymer layer	BTI Select
3919908060	- - - - Reflecting film containing: -\|a poly(vinyl chloride) layer, -\|a polyurethane layer, -\|a glass microspheres layer, -\|a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view, -\|a metallised aluminium layer, and -\|an adhesive, covered on one side with a release liner	BTI Select
3919908063	- - - - Co-extruded trilayer film, -\|each layer containing a mixture of polypropylene and polyethylene, -\|containing not more than 3\|% by weight of other polymers, -\|whether or not containing titanium dioxide in the core layer, -\|coated with an acrylic pressure sensitive adhesive and -\|with a release liner -\|of an overall thickness of not more than 110\|µm	BTI Select
3919908065	- - - - Self-adhesive film with a thickness of 40 µm or more, but not more than 400 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner	BTI Select
3919908067	- - - - Self-adhesive plastic film consisting of: -\|a poly(olefin) layer with a thickness of more than 95\|but not more than 110\|microns -\|an adhesive layer with a thickness of more than 5\|but not more than 15\|microns -\|a layer based on epoxy resin, with a thickness of more than 4\|but not more than 100\|microns -\|a liner consisting of poly(ethylene terephthalate) with a thickness of more than 35\|but not more than 40\|microns	BTI Select
3919908070	- - - - Self-adhesive polishing discs of microporous polyurethane, whether or not\|coated with a\|pad	BTI Select
3919908075	- - - - Rolls of polyethylene foil: -\|self-adhesive on one side, -\|of a total thickness of 0,025\|mm or more, but not more than 0,09\|mm, -\|of a total width of 60\|mm or more, but not more than 1\|110\|mm, of a kind used for the protection of the surface of products of headings 8521\|or 8528	BTI Select
3919908080	- - - - Self adhesive reflecting film, consisting of several layers including: -\|a copolymer of acrylic resin, -\|polyurethane,\| -\|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, -\|glass microspheres, and -\|an adhesive layer, with a release liner on one or both sides	BTI Select
3919908081	- - - - Film of a minimum thickness of 0,36\|mm, consisting of the following: -\|an embossed polyester layer, -\|a caprolactone-cyclohexylene isocyanate copolymer layer, -\|a pressure sensitive adhesive and covered on one side with a release liner	BTI Select
3919908082	- - - - Reflecting film consisting of: -\|a polyurethane layer, -\|a glass microspheres layer, -\|a metallised aluminium layer, and -\|an adhesive, covered on one or both sides with a release liner, -\|whether or not a poly(vinyl chloride) layer, -\|a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use	BTI Select
3919908083	- - - - Reflector or diffuser sheets, in rolls, -\|for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or -\|for equal transmission and distribution of light, intended for LCD modules	BTI Select
3919908099	- - - - Other	BTI Select